CAS4 ID change

[data1x]

Hi.
Could some one help me to write new VIN and ISN in CAS4 eeprom, motorola 1L15Y .
New VIN : WBAFW51050C509498
NEW ISN: 8C51DE2814935AE1E980B7CF629EF61D
CAS4
I need this for testing.
Thanks.

[droidwayne65]

Hi.
Could some one help me to write new VIN and ISN in CAS4 eeprom, motorola 1L15Y .
New VIN : WBAFW51050C509498
NEW ISN: 8C51DE2814935AE1E980B7CF629EF61D
CAS4
I need this for testing.
Thanks.
So where is the file?

[data1x]

Ohh sorry its added :)

[KriptoKey]

Dear Friend
The file you have published is completely zeros. read again please

[data1x]

Hi, here it shows not empty:gorilla:

[data1x]

Dear Friend
The file you have published is completely zeros. read again please
Hi, here it shows not empty!

[data1x]

Hi dear, in this file Original VIN and ISN but i need to writhe this ids on the New file!

[droidwayne65]

The "NEW" file is empty.

[data1x]

The "NEW" file is empty.

Hi, file replaced now, so you can check it. Big thanks.

[kris81orzesze]

new vin and isn

[data1x]

new vin and isn
Big thanks to you and for all. Thanks again. can i ask you if you can move key 2 and 3 data and info and all thing belong to it from original file to new file ONLY KEY 2 NAD 3 and place it on Key 1 and 2 PLZ. And many many thanks.

[kris81orzesze]

No, i cant do it manually. i have to put the key in the programmer to add to the cas eeprom.

[data1x]

No, i cant do it manually. i have to put the key in the programmer to add to the cas eeprom.
Hi, so if i have fvdi its help to move keys from original to new even if new already have 1, 2 busy place? or i must remove the data from lines that belong to keys 1, 2 from new and add new keys using fvdi? Thanks

[data1x]

No, i cant do it manually. i have to put the key in the programmer to add to the cas eeprom.
Hi, after re flashing to cas 4 with new file and connecting to car nothing happened! so i think there is something missing on new file! So what we need also to move from original file to new? i added new key and nothing happened!! so can you help me to fix it? What i need to move from original to new is all necessary data except keys and all belong to it and if there any other security want to remove it!

All story on this car and this cas 4,the car is came with 2 kind of keys, first one its normal keys*2 original keys* but the second its came with key but not original like first one and this key was working and we use it unless its stop working! then we came to original keys and want to use it here i can open and close the car normally but its wont start!! i need to remove the car battery for 1 min or more some times and then every thing came normal i can start the car and drive it normal USING original key!! Unless i came out from the car and close it using the original key and after 2-3 min when i open it again its opened but nothing appear on the dashboard only wips working! Then i need to remove the car battery for 1-3 min and re plug it and every thing came ok!!!
so i decide to take a look on cas4 , what i found near cas4 is box with receiver for the fist old key that we use it before and there is 2 lines shared with cas4 lines so i cut it and removed the box and all other thing belong to. So what i think, there is kind of security programmed on cas 4 belong to that receiver and i need to remove all things belong to it. that is all the story

[kris81orzesze]

There could be check sum problem.. what diagnosis says?

[data1x]

HI Kris, its says checksum error! so what that mean and how to fix that? and how to move all necessary data from original file like VIN, ISN and any other data to new file! Can you help with this. Thanks

[data1x]

There could be check sum problem.. what diagnosis says?

HI Kris, its says checksum error! so what that mean and how to fix that? and how to move all necessary data from original file like VIN, ISN and any other data to new file! Can you help with this. Thanks