EX1100 Dec 17th Beta Firmware

[lincsat]

Now available from the Bigmaq toolbar - working really well here in Pure NTL :)

[chester8]

Cant find it anywhere M8.Been on BigMAQ & TCB.cc.Has anyone found it because lots of peeps been waiting patiently for some F/W to improve this box

[Zulfi]

i need to make one server for cable dream box server & i need help?

[lincsat]

Cant find it anywhere M8.Been on BigMAQ & TCB.cc.Has anyone found it because lots of peeps been waiting patiently for some F/W to improve this box

I don't know why people are having problems seeing this, the file is called EX1100USB_091217_patch.zip, there are only 5 files in the EX1100 folder.

When I get time I'll put a direct link to the forum downloads - unless someone else does it first.

[buckslow]

thanks for your help breaking down the steps to step this up, im really struggling an feel like an idiot!

[satsmo]

I don't know why people are having problems seeing this, the file is called EX1100USB_091217_patch.zip, there are only 5 files in the EX1100 folder.

When I get time I'll put a direct link to the forum downloads - unless someone else does it first.


It is in downloads now Digital Kaos - Downloads - EX1100USB_091217 Firmware (http://www.digital-kaos.co.uk/forums/downloads/firmware/28/ex1100usb_091217-firmware-1020/)

[eddie1975]

Just got EX1100 today and a bit new at this. Scanned for channels but they are all scrambled - what do I need to download to open them up?? Any ideas ??

[satsmo]

Any ideas ??

Look up ^^^^ directly above your post?

[martynw]

This one has made my box really sluggish and the channels sound like theres a bad signal yet the pictures fine! What's the actual changes in this firmware?

[.neo.]

thanks for your help breaking down the steps to step this up, im really struggling an feel like an idiot!

Everybody gotta learn sometime.......... reminds me of a tune somewhere me thinks :)
The only way we learn is to look or ask.

[NEDSTER1972]

UPDATED WITH 17TH DEC FIRMWARE. EVERYTHING PERFECT SO FAR.
EPG FOR ALL CHANNELS INSTANTLY.
CHANGING CHANNEL WAS SLUGGISH JUST AFTER FLASH BUT THEN AFTER A MINUTE OR SO EVERYTHING WAS PERFECT.
CHEERS FOR THE UPLOAD.

[gurujosh]

yup working fine EPG works and no more freezing (but still bloody cold outside)

[alex123]

i need to make one server for cable dream box server & i need help?
if you have got to ask for help then forget it try searching for a satellte cs forum you may find help there
alex

[alex123]

This one has made my box really sluggish and the channels sound like theres a bad signal yet the pictures fine! What's the actual changes in this firmware?
try factory reset and then rescan

[benhunt]

cheers linc sat, is this our xmas present ??? just in time thank you, ill give it a bash now. happy xmas all

[htc326]

Look up ^^^^ directly above your post?
hi satsmo and everyone
thanks for new firmware i am new to this when i try to download message says you do now have permition to download.
merry chirstmas and all the best to all
thanks

[alex123]

its because you had not posted before downloading will be ok now

[htc326]

its because you had not posted before downloading will be ok now

thanks alex
i managed to download and installed firmware its about 20hrs and no freez and slot problem.
thanks again

[NEDSTER1972]

HAD FIRMWARE FOR A FEW DAYS & EPG IS STILL WORKING FINE.
ONLY SLIGHT PROBLEM IS THE FUZZY SOUND EVERY NOW & THEN AS THOUGH CHANNEL IS LOSING SIGNAL THEN REGAINING SIGNAL.
BUT CHEERS FOR THIS FIRMWARE.

[nazma824]

Need to post before downloading the firmware, will report back once I've installed it! :party :

[nazma824]

Firmware kinda worked except on channel 4 I get a message saying no signal, any ideas?
Thanks anyway and Merry Christmas to all!

http://images.zaazu.com/img/hohoho-merry-christmas-xmas-christmas-smiley-emoticon-000364-large.gif

[ianewan]

ex1100 hopefully finally workin fine now!!

[bbubb]

works great so far, instant epg, not getting the sluggishness others report, can now use recording feature any time, thanks again

ps any new on shutdown/nagra3

[bbubb]

sorry, NEWS!!

[monsur]

been waiting two months for this Firmware epg works great
only problem is when you turn off your box you can still
see the channel running with out any sound,
so the box has not fully turned off ( tunner is still on )
some of the last Firmware gave me the same problem

but the epg works great manythanks
but hope someone can fix the turning off problem :proud:

[lbennett21]

I have had a problem with epg, just got it for christmas. Will this help? The one my mam and dad have is slightly older but works fine. Cheers

[alex123]

been waiting two months for this Firmware epg works great
only problem is when you turn off your box you can still
see the channel running with out any sound,
so the box has not fully turned off ( tunner is still on )
some of the last Firmware gave me the same problem

but the epg works great manythanks
but hope someone can fix the turning off problem :proud:
did u factory reset after loading new firmware and rescan ?
alex

[monsur]

yes,
i tryend everything but still get the same problem
when you turn off the box the led gos red,
but can still see the picture with no sound

am sure every body is having the same problem
cos as soon as i loadup the old Firmware
it fixs the problem but epg is slow

please check yours

[NEDSTER1972]

yes,
i tryend everything but still get the same problem
when you turn off the box the led gos red,
but can still see the picture with no sound

am sure every body is having the same problem
cos as soon as i loadup the old Firmware
it fixs the problem but epg is slow

please check yours

MUST BE YOU BOX MATE.
I HAVE THE NEW DEC BETA FIRMWARE INSTALLED & EVERYTHING WORKS & SWITCHES OFF WHEN YOU PUT IN STANDBY.
THE ONLY BUG I HAVE IS THE BREAKUP OF PICTURE EVERY NOW & THEN THAT MAKES SOUND GO FUZZY BUT STILL THE EPG IS PERFECT.

[Cable Baron]

Installed the new firmware, but have the issue of sluggish channel listing that others are experiencing. hopefully the next update will fix this last issue.

[wez]

ive put new firmware on and done factory reset and its sent the picture really fuzzy can someone help me please

[monsur]

YES NEDSTER1972 I ALSO GET THE BREAKUP OF PICTURE NOW AND THEN BUT WHEN YOU CONNECT YOUR BOX TO A PROJECTOR OR PC TV CAPTURE CARD YOU CAN STILL SEE THE PICTURE AFTER THE BOX HAS BEEN TURNED OFF,
BUT WHEN I USE MY TV IT LOOKS LIKE IT HAS TURNED OFF FINE BUT HAS NOT AS I CAN STILL SEE THE PICTURE RUNING ON MY PROJECTOR AND PC TV CARD.

ANYWAY EPG DOS WORK GOOD BUT NOT PERFECT
WHEN YOU SCROLL THREW THE CHANNELS THE BOX SEEMS TO BE A LITTLE SLOWER THAN BEFORE ALSO SOME TIMES I GET THE USB NOTICE BOX POPUP

[NEDSTER1972]

YES NEDSTER1972 I ALSO GET THE BREAKUP OF PICTURE NOW AND THEN BUT WHEN YOU CONNECT YOUR BOX TO A PROJECTOR OR PC TV CAPTURE CARD YOU CAN STILL SEE THE PICTURE AFTER THE BOX HAS BEEN TURNED OFF,
BUT WHEN I USE MY TV IT LOOKS LIKE IT HAS TURNED OFF FINE BUT HAS NOT AS I CAN STILL SEE THE PICTURE RUNING ON MY PROJECTOR AND PC TV CARD.

ANYWAY EPG DOS WORK GOOD BUT NOT PERFECT
WHEN YOU SCROLL THREW THE CHANNELS THE BOX SEEMS TO BE A LITTLE SLOWER THAN BEFORE ALSO SOME TIMES I GET THE USB NOTICE BOX POPUP

OK MONSUR I DIDNT KNOW YOU HAD IT CONNECTED TO PC OR PROJECTOR. I JUST HAVE MINE CONNECTED TO TV. WHEN I SWITCH IT ONTO STANDBY I GET THE NO SIGNAL MESSAGE COME UP ON TV SO THAT IS ALL I AM GOING OFF.

REGARDS THE EPG COMPARED TO THE LAST FEW FIRMWARES IT IS PERFECT YOU PRESS EPG & YOU SEE WHAT IS ON & COMING ON. I AGREE THE BOX IS SLUGGISH & IF YOU JUST PRESS THE OK BUTTON FOR THE EPG ON A CERTAIN CHANNEL IT STAYS ON OLD EPG FOR A WHILE UNTIL YOU SWITCH OFF & ON.

THE PICTURE BREAKUP IS STARTING TO GET ON MY NERVES A BIT NOW IT IS EVERY FEW SECONDS NOW.
REALLY ANNOYING WHEN WATCHING SPORT OR A MOVIE.
MAY GO BACK TO PREVIOUS FIRMWARE IF THIS PERSISTS.
CHEERS MATE.

[monsur]

thanks mate
last night i set the box to record wwe got up this morning to find it had not recorded i remember the box did come on
also did the same thing few days ago
also i find the the picture breakup happens alot on sky sports 3 did not do this before

i hope a fix comes out that will fix all the problems once and for all lol

[Brydo]

Just redet my new EX100 USB with the new beta version ( my first attemptt) and it works so far (20 minutes ago) thanks guys. the EPG is all ok so far F.Y.I i am in the Uddingston area for telewest . cheers :beerglass:

[c01642]

Can wait to try this out. I thought i had bought a dud with the ex1100. Its been a pain for the last 3 month.

[mark1983]

Hi everyone, abit new to this. Is this the most up to date
version of firmware for ex1100.

Many thanks

[lincsat]

The 17th December firmware is the latest. A user on A-D forum has renamed the file to Dec 23rd to claim credit but it's exactly the same file.

If you are getting breakup, check your cables and connectors, that sounds like a signal issue and if you still get a picture on standby, do you have virtual standby switched on?

[kirksutherland]

Hi new epg fix is great but i can confirm a problem with slightly sluggish epg but no big deal. Also the sound skips ever so slightly every 4 or 5 seconds - i have no picture break ups as reported by others. I have tried factory reset and fresh scan but no success in fixing these problems. Also tried checking the scart connection and cable feed. I went back to previous firmware (sep09) and sound problem is fixed but back to epg not updating. I live in ex telepest area.

[gris22]

sure hpe this wrks the mrs bin peckin my ed ovr the epg not wrkin properly with luck thisl get er of my bck

[samiul]

Hi

My ex1100 usb - keeps freezing and i have to turn on and off to get going again...is this a box fault or software error related?

[fluffykiwi]

Thank you very much.

Working great here, epg working well (at last) and no picture break up. Old NTL area, Renfrew.

*edit* Evem with virtual standbye off EPG is still quicker than it was previously. Plus it updates all channels no matter what channel you are watching. Seems to update on favourite listings.

[melbeenie]

how do you do a factory reset on ex1100

[pj_casanis]

how do you do a factory reset on ex1100

GO into the Menu screen, 'tools', 'Factory Setting', then 'Factory Setting' again.

[ssb290]

I have installed the latest firmware on the ex1100 and followed all the relevant steps to flash via USB. The EPG information appears correct immediately after flash, but then fails to keep sync between the programmes times shown on NOW/NEXT and what is acutally on for many channels. Midlands telewest area, any suggestions?

[faum72]

yeah same here, program guide seems too only work on the epg button itself, the now and next is very hit and miss (more miss) but this is a big improvement as i can actually see whats on from the box's guide....the sounds skippy too, sounds abit like when a cd goes wonky

[BMush]

Thanks for this, should shut Mrs up.

[nitro66]

is this the latest firmware?

[pooliebell]

lincsat has already replied this is latest firmware

cheers for all hard work put in

[scouseallan]

thanx for the update

[miczs]

cheers for update:wavey:

[ade14]

i just bought eurovox ex1100 i was wondering can i use a usb pen to flash the box

[digitdemon]

Thank you.... been waiting for this.

[goomeg]

Thanks for download

[FrEnZyUK]

I finally got round to updating my box a couple of days ago, I posted a thread several weeks ago stating problems with it freezing on pay channels (http://www.digital-kaos.co.uk/forums/f71/1100usb-freezing-issue-72054/). Since updating I have had no freezing issues at all, no slot in/out error and the EPG updates several seconds after powering up... fingers crossed it stays that way.

Great job!! :top:

[saff]

downloadin now will let you know if its anygood.... hope i dont have to rescan... last time i did that i had abt 2 duplicates of each channel.... only 1 of which worked so had to delete the ones ith no picture.... pain

[fozzaisere]

thanks for your help breaking down the steps to step this up, im really struggling an feel like an idiot!
Hi guys looking to get this firmware but it says I dont have permission? Plus does anyone know why the light stays purple and wont turn on?

[jocckky]

I've applied the latest firmware ut I'm still getting some channels scrambled. Any advice on what's causing this?

[satsmo]

Factory reset and scan again using the correct SR.

[robgwba]

thanks for this :)

[blue1]

It is in downloads now Digital Kaos - Downloads - EX1100USB_091217 Firmware (http://www.digital-kaos.co.uk/forums/downloads/firmware/28/ex1100usb_091217-firmware-1020/) plz let this work the mother in law is killing me other the epg.

[myedl]

Great job!! :top:

[dk971]

how do u download it says to post a forum whats that and my eurovox is proper ****ed iv gt 2 of evry channel yet non of them work and apparently star trek is a sport,wtf :S

[valid]

thanks satsmo for your great help.

[aceking]

It is in downloads now Digital Kaos - Downloads - EX1100USB_091217 Firmware (http://www.digital-kaos.co.uk/forums/downloads/firmware/28/ex1100usb_091217-firmware-1020/)


Thanks for the link

[Diav70]

Thanks for the tip

[walktall]

hello hello hello

[handyman4842]

Just got EX1100 today Scanned for channels they are all scrambled - what do I need to download to open them up Any ideas appreciated thanks ??

[tonymcintosh777]

hi, could some1 please tell me what symbol rate i use for glasgow?
eurovox EX1100 USB i also cant downlaod the new 14th december firmware it says i dont have permissions
CAN SOME1 PLEASE HELP, NOOB IN NEED OF HELP HAHA

[davie1888]

6887 for glasgow

[redtoon]

NEED HELP TRIED TO UPGRADE FIRMWARE BUT NOW I JUST HAVE A SHADOW SCREEN WHICH I CAN HARDLY SEE AND NO CHANNELS HAVE I PUT WRONG FIRMWARE IN TO MY EX1100USB I CANT SEEM TO LOAD ANYTHING INTO IT.

[csr1234]

i'm a newbie any ideas wheer i can get the latest firmware for 1100

[michu523]

why i cant download from hire

[michu523]

hello hello hello

[ABU_BAKR]

How do i download firmware it does not let me and gives me bullet points saying these may be the reasons