DQ250 Cxx tuning

[reselie]

Hi ,

I've read using KESS via OBD my DSG Cxx mechatronic. First of all can someone confirm that its a good redout (02E927770AE_02E300043C_1111) ?

Secondly unfortunatelly even if i am looking all over for the last 3-4 days, I FAILED to find any damos or create my own using the xxxxxxCP temic damos that are floating arround (attached for anyone intrested & reference.)

I would be greatful if someone can provide me damos for this tcu or tune it for me (7200 rpm shift, and 500nm limit would be ok!) as right now i got torque reduction on shift...



Thank you m8s :)

[reselie]

Ok right now i have managed to define the below maps , any help as per what changes should i do to increase clutch pressure to avoid cooking my clutch would be precious :)

Also i changed Maximale motordrehzahl to 7200 (it was 6700) and max. Motormoment Getriebeschutz to 500nm from 350. Should i touch anything else for these 2 settings? (shiftpoint on M and torque reduction)

Thanks!

[reselie]

Just a quick match up, i found all the necessary maps and set the shiftpoints to 7100 , it shifts like a charm. Thanks to everyone that helped...

[thaelegs]

how did you go about doing this buddy? i have a mk5 gti DSG and i want to tune my dsg map as well same as yours

[artec12]

how did you go about doing this buddy? i have a mk5 gti DSG and i want to tune my dsg map as well same as yours
I am interested as well for a mk5 any help would be appreciated!

[Lambda1]

write pn to icezero he can help you with.

[teobolo]

here is a Golf5 Gti .ols project i make with most maps needed. it is maded from genuine WinOls

https://files.fm/u/h8cy239u

[fireblal775]

hello, i need to necessarily modify a DSQ gear does anyone do this? I do not know what I think Kess should download the original map but I do not know what to edit, etc. can you please help me? i have Octavii 3 2.0tdi 135kw (204kw adjustment) I need to edit it dsg :(

[Lambda1]

ori kess or china things?

[reselie]

Hi again after a long time. I deserted the thread because of no answers and just saw the above.

I managed to
-set the torque limit 500nm - mmrTemperaMmax_kl & mmr_mmaxgetriebeschutz_ko
-set the shift point to 7000rpm for all modes
-reduce shifting times
-increased max rpm limit (GHes_NmotorMax_ko and KusNBergNMaxNeutral_ko)
-set lower times for launch control (KusLauchFiltBrAusst_ko , KusLauchFiltBrEinst_ko) set to 40ms and 10ms

Although i'm looking after how to increase clutch pressure as it seems that its sliping a bit on 4th gear & 5th gear

Could you help me a lil bit please?

What maps i need to touch and how? i guess that i need to
increase MAX STROM for k1 and k2 (1400ma from stock)
DEcrease?? ma to 10 and 15 bar HdrPHauptzul_kf_z as it seems to be a pressure relief valve vs target?
what else?


thanks in advance!

676464

[reselie]

ori kess or china things?

reworked red pcb... works (at least for now) like a charm!

[reselie]

here is a Golf5 Gti .ols project i make with most maps needed. it is maded from genuine WinOls

https://files.fm/u/h8cy239u

Hi, i checked against my file and its a helpful project, just a bit off against my file but ok.! thanks

[xmifeng6]

And finally had you increased your clutch oil pressure? successfully ?

[marcosandujar8]

Hi ,

I've read using KESS via OBD my DSG Cxx mechatronic. First of all can someone confirm that its a good redout (02E927770AE_02E300043C_1111) ?

Secondly unfortunatelly even if i am looking all over for the last 3-4 days, I FAILED to find any damos or create my own using the xxxxxxCP temic damos that are floating arround (attached for anyone intrested & reference.)

I would be greatful if someone can provide me damos for this tcu or tune it for me (7200 rpm shift, and 500nm limit would be ok!) as right now i got torque reduction on shift...



Thank you m8s :)

I've been searching all the forums for months and I haven't been able to find a way to make my file for 02E300042Q taking 02E300011CP as a reference, which is in all the forums out there, if you can shed a little light on it I would really appreciate it

[hishamswidan]

Hi ,

I've read using KESS via OBD my DSG Cxx mechatronic. First of all can someone confirm that its a good redout (02E927770AE_02E300043C_1111) ?

Secondly unfortunatelly even if i am looking all over for the last 3-4 days, I FAILED to find any damos or create my own using the xxxxxxCP temic damos that are floating arround (attached for anyone intrested & reference.)

I would be greatful if someone can provide me damos for this tcu or tune it for me (7200 rpm shift, and 500nm limit would be ok!) as right now i got torque reduction on shift...



Thank you m8s :)

Hello bro , can you share your damos for this tcu


Sent from my iPhone using Tapatalk

[hishamswidan]

here is a Golf5 Gti .ols project i make with most maps needed. it is maded from genuine WinOls

https://files.fm/u/h8cy239u

Is that project for Dsg tcu ?


Sent from my iPhone using Tapatalk