BMW 320 2001 km Change

[SANTI-MECCANICA]

Good morning first thing to forgive my English is not very good.
It is a question of how to I edit a BMW 320 KM from the years 2001, work I'm doing with the Pa-soft memory lets me read eeprom from the table (IKE M35080) light module (LCM HC11P2-3 ) and the EWS. The problem lies in that it only lets me change the KM of the MCL and will not let me from the other modules.

You can help me solve the problem? step by step is the first time I do the car has 195.442Km and I wish I had 105.000Km

I attached the extracted files.

Thank you very much for everything.

[PremierD]

First thing mate ... your dumps are ..Rubbish .. the only one that is ok is LCM ... The EWS ..is not big enough ..should be 512 bytes .. and there is No dump from the M35080 ...

Have modded the LCM ...

[SANTI-MECCANICA]

Bytes are leaving me.
In the LCM lets me change the KM in the other systems do not appear in the pa-soft and modify them in the trash instead-soft if I modifircar appears as the KM.

Also you have commented that the SSS program Pordio change a module and KM
delete the bytes of the box and program it as if it were new.

Forgive my English

[PremierD]

Bytes are leaving me.
In the LCM lets me change the KM in the other systems do not appear in the pa-soft and modify them in the trash instead-soft if I modifircar appears as the KM.

Also you have commented that the SSS program Pordio change a module and KM
delete the bytes of the box and program it as if it were new.

Forgive my English

You Have lost me there mate .... Lets try a different road .... What is your language ....I'll Try to explain it better ....

[SANTI-MECCANICA]

Thanks for your help I'm from Spain.

[PremierD]

Thanks for your help I'm from Spain.



Compa?ero aceptable? qu? lo necesitamos una descarga del tablero de instrumentos. eeprom 35080?.Y un trom de la descarga el EWS. .HC11? ?Usted los tiene.? Descargas originales. ?.before usted cambi? cualquier cosa?

[SANTI-MECCANICA]

Los archivos originales son los que subido, no tengo otros.

Estan descargados con el pa-soft

[bruno504]

Los archivos originales son los que subido, no tengo otros.

Estan descargados con el pa-soft

Need help too...
I think I'm having some bug in my 320d ?98 instrument cluster (IKE), that increases fuel gauge measuarement and also the remaining kilometres, each 100km drived!, and never lowers until I made the reset on IKE! after reset shows correct fuel level.
Any help on this? someone that knows how ike firmware calculates the fuel level?
Can anyone sent me ike_eep.bin from 320d '99 e46? (maybe it helps me to view if some adress memory is faulty! - this is driving me nuts.
I've pasoft 1.3.5 to load this firmware to ike.

[ABEE]

thx. my eprom ist damaged

[teerak2uk]

damaged or corrupt

[velvetj69]

Does anyone have the BIN files for an E38 or E39 instrument cluster? I have a 2001 and need the following.

IKE_eep.bin and IKE_EEP.wr

Mines have corrupted and I have erractic guages now. I have the 93S55 chip, SW 13

Thanks

[velvetj69]

Try the attached file

[fabiobmw]

Hello I have a 320d 2000
Hardware 9 software 16

the eeprom was broken so I change it and could not save the original dump file. I writed a dump file but now the Manipulation light is up. de little Dot on display.

tried to recode the Odometer with SSS and it cant do it. I find out that to code it iI need a new odometer. a VIRGIN one.

If somone has a Virgin dump file please help me .
EEprom 93s66
my VIN WBAAL71070K59037
Thanks guys.. Please make me happy for Christmas :)

[zogldi]

Good morning first thing to forgive my English is not very good.
It is a question of how to I edit a BMW 320 KM from the years 2001, work I'm doing with the Pa-soft memory lets me read eeprom from the table (IKE M35080) light module (LCM HC11P2-3 ) and the EWS. The problem lies in that it only lets me change the KM of the MCL and will not let me from the other modules.

You can help me solve the problem? step by step is the first time I do the car has 195.442Km and I wish I had 105.000Km

I attached the extracted files.

Thank you very much for everything.

Do not read dump with BMW scanner! Read with programmer and put it here!

[fabiobmw]

Hello I have a 320d 2000
Hardware 9 software 16

the eeprom was broken so I change it and could not save the original dump file. I writed a dump file but now the Manipulation light is up. de little Dot on display.

tried to recode the Odometer with SSS and it cant do it. I find out that to code it iI need a new odometer. a VIRGIN one.

If somone has a Virgin dump file please help me .
EEprom 93s66
my VIN WBAAL71070K59037
Thanks guys.. Please make me happy for Christmas :)
SOMEONE PLEASE HELP !!!