M3.8.3 ecu map file

[Mk4agugt24]

Hello people who are so very helpful. It may sound like a stupid question but say I get a file for my mk4 golf agu m3.8.3 ecu. I load that into a copy of winols ( fully working) can I find the immobiliser settings within that map. I know I have read 24c02 I was under the assumption that was the hex address for the immobiliser information. Is this correct or is the immobiliser information on a separate chip to the main map for the car?

[Lambda1]

off file looks okay... cant compare because no ori there but trick 50 looks okay.
did you really want to use this "tune"

[Mk4agugt24]

It’s the only map I have. I can’t find the maps to do real editing in winols. Can you point me in the direction of a better map for a stock mk4 golf 1.8t agu engine. I’m trying to sort it out for a friend. I have an eprom chip reader arriving tomorrow so I will be able to flash the immo chip to turn it off, as it is going into a mk2 golf chassis.

[vitaliyl]

what this?634885
it's ori file,compare

[Mk4agugt24]

That’s was a mistake >.> I thought maybe the ecu map file holder the immo information at 24c02 so I put an immobfile there but I have since learned that is not the case so I have since removed it. And hopefully receiving a flash chip tool today.

[hillbrothers]

works well with standard agu setup