Peugeot BSI rescue problem

[407heppu]

Hi!
Can someone advise me on a BSI problem
I have a Peugeot 2.2 Hdi 2008 SW
ECU broke down.
I couldn't find any parts of the SW model, so I changed the corresponding 4HT’s parts: ECU, BSI, Keys.
Otherwise it works but maybe due to different wiring the air conditioning does not work.
The reason is wrong BSI.


The old BSI was:
Johnson Controls
BSI04EV K04-00 230608
96 640 590 8001
BOOT 28120836-4 V05.01
HARD 28119248-3C


The new is:
Johnson Controls
BSI04EV K04-00 230608
96 640 590 8001
BOOT 28120836-4 V05.01
HARD 28119248-3B


(I have that old BSI that is not broken)

What would be the easiest option?
Can I take the dump from the old BSI and put it in a new one?
Or can the old BSI's VIN and PIN be changed to the same as the new one?


heppu

[bodzio012]

Do you have Diagbox?
If yes try to find in BSI configuration, if not work, the better will be put your orginal BSI and keys but ECU try to copy immo from your old to second/used.
Or second ECU make to virgin and by diagbox change.

[galaxy0634]

So replace the old bsi in ur car with replacing old immo to the new immo with pin code thats all

[407heppu]

Thanks!
It is unfortunately Johnson Controls BSI.
I have a Diagbox, but have I understood correctly that the only way is to do a trick with FVDI?
However, I do not receive a read PIN code on the Diagbox.

heppu

[galaxy0634]

Thanks!
It is unfortunately Johnson Controls BSI.
I have a Diagbox, but have I understood correctly that the only way is to do a trick with FVDI?
However, I do not receive a read PIN code on the Diagbox.

heppu pin cant be read with diagbox u must post dump here and match pin and immo .sir

[407heppu]

Thanks!
I'm looking for a suitable time when the car's need is not as critical as it is now.

heppu

[pagautas]

Configure bsi with pp2000/diagbox. It's easy AF. bsi config -> heating/ventilation and go through config options.


Hi!
Can someone advise me on a BSI problem
I have a Peugeot 2.2 Hdi 2008 SW
ECU broke down.
I couldn't find any parts of the SW model, so I changed the corresponding 4HT’s parts: ECU, BSI, Keys.
Otherwise it works but maybe due to different wiring the air conditioning does not work.
The reason is wrong BSI.


The old BSI was:
Johnson Controls
BSI04EV K04-00 230608
96 640 590 8001
BOOT 28120836-4 V05.01
HARD 28119248-3C


The new is:
Johnson Controls
BSI04EV K04-00 230608
96 640 590 8001
BOOT 28120836-4 V05.01
HARD 28119248-3B


(I have that old BSI that is not broken)

What would be the easiest option?
Can I take the dump from the old BSI and put it in a new one?
Or can the old BSI's VIN and PIN be changed to the same as the new one?


heppu

[407heppu]

Hi!
With Diagbox does not allow the compressor to operate properly.


I tried to read the PIN with fvdi 2018. BSI went into BOOT mode. Not waking up in any way.
An additional power supply was connected.




I have another BSI and a proper dump and a key immo card, but no real pin code.
Any advice?


BSI number 2 is:
Johnson Controls
BSI04EV K04-00 230608
96 640 590 8001
BOOT 28120836-4 V05.01
HARD 28119248-3 C
Current VIN is: VF36D4HTH21672282


heppu

[jomberykaso]

put bsi dump here and then i will post your real pin code

[407heppu]

Thanks for the support! Educational experiment.
I survived on Fvdi.
Twice wake up from boot mode.
Change of BSI and change of PIN and VIN.
Programming of keys.
Air conditioning works now too!

heppu