PDA

View Full Version : opel insignia 2.0cdti 2009y 133cv need dpf off



tiugrikas
10th July, 2019, 10:11 PM
hi mates need correct dpf off solution car is opel insignia 2009y 2.0cdti 133cv .thanks in advance

unnamed11112007
10th July, 2019, 11:06 PM
Hi

DPF OFF for you

------>634345

pass in pm

tiugrikas
11th July, 2019, 10:55 PM
Today I tested file drives good but soot accumuliation is growing and after about 200km customer reported about dpf message in instrument display poped up . I reseted it with opcom and it goes to 69% but after test drive it is still growing . any more solution ? By the way dpf pressure sensor is deffected in this car

Išsiųsta naudojantis LM-Q610.FG Tapatalk 4 Lt

Rachid69
11th July, 2019, 11:47 PM
Try and report

tiugrikas
12th July, 2019, 06:47 AM
Try and report
hi mate thanks for your file but what is the pass ?

tiugrikas
14th July, 2019, 03:46 PM
I tested file but same result soot accumulation still growing up . any solutions more ?

Išsiųsta naudojantis LM-Q610.FG Tapatalk 4 Lt

bodzio012
14th July, 2019, 04:13 PM
Try and give report, pass PM

tiugrikas
17th July, 2019, 12:02 AM
With this file shows soot accumulation 69% after about 20 km drive goes up to 70% . tryed reset dpf with op com than it goes back to 69% and after test drive up 70 %to and stay . I think after reset dpf should be 0 % or maybe i am wrong ?

Išsiųsta naudojantis LM-Q610.FG Tapatalk 4 Lt

Rd TUned
17th July, 2019, 01:48 AM
With this file shows soot accumulation 69% after about 20 km drive goes up to 70% . tryed reset dpf with op com than it goes back to 69% and after test drive up 70 %to and stay . I think after reset dpf should be 0 % or maybe i am wrong ?

Išsiųsta naudojantis LM-Q610.FG Tapatalk 4 Lt
you need put original files and reset, after put the mod files :)