PDA

View Full Version : Rate My Tune 520D E60 EDC16C35



doctora90
15th July, 2019, 12:30 PM
Somebody please take a look at my creation. It's on the car now and runs strong with small amount of smoke. I think that it could do more though. Logs shows 80mg and 2700mbar steady from 2500 til 4500 rpm. I'll be also gratefull if somebody help me define the lambda maps correctly. It's an EU3 file with EGR off. 10x in advance.

flashtech
15th July, 2019, 01:51 PM
Hi! Seems good. Im driving e91 320d full stock on EU3 with egr off can inject about 90 - 92mg.
Maybe later I can take a more detailed look on your file.

doctora90
15th July, 2019, 04:14 PM
Thanks for the reply. I'm attaching the logs. They are taken with Testo and I'm using Testo viewer to look at them and I saw that the rail pressure is barely 1600. I should tweak with rail pressure maps i think. Also the build in torque monitor shows only 370NM peak.... something is not right. I'll appreciate any advice.

flashtech
16th July, 2019, 08:13 AM
Try this and report.

doctora90
16th July, 2019, 11:04 AM
Thank you. I'll try ASAP.

doctora90
16th July, 2019, 01:40 PM
What's the maximum safe pressure of the turbo. It's GTB1752V and I see in other files that people run them at 1.84 bar slowly falling to 1.7 at redline.

rfernandes
16th July, 2019, 04:10 PM
Normaly i encrese 200gr on last colums..
If 1.60 ad 200gr to 1.80 on stock turbo..
But its me..maybe others make another way