PDA

View Full Version : Galletto or MPPS for FORD FOCUS 1.6TDCI 2010



adryan
15th July, 2019, 07:26 PM
Hi, it would be my first car (girlfriends car) and i want do things with low risk.
Thanks!

bodzio012
15th July, 2019, 07:31 PM
Mpps and galetto read and write without problem edc16c34 from focus

Junkyard Dog
15th July, 2019, 07:33 PM
Galletto is more stable.

adryan
15th July, 2019, 08:05 PM
Mpps and galetto read and write without problem edc16c34 from focus


Galletto is more stable.
Thanks,lets go to buy a Galleto!

aem
15th July, 2019, 08:06 PM
If is 2010 is euro 5 model and you will not be able to read by obd.Only bdm

ollync
15th July, 2019, 08:14 PM
I don‘t have experience with Galletto but writing this ecu with MPPS will definitely F..K your ecu.


Sent from my iPhone using Tapatalk Pro

adryan
15th July, 2019, 08:24 PM
If is 2010 is euro 5 model and you will not be able to read by obd.Only bdm

yes, is a model from 2010... i need open the ecu?

bodzio012
15th July, 2019, 08:47 PM
Calm down, If you flash will erase you write something from net and car start, some time ago I write different dumps from other focus and on 20 dumps, 16 working, but sometimes was faults.
All by OBD and galetto.
Mpps v18 I used too and all ok.

ollync
15th July, 2019, 10:08 PM
When flash is corrupted , he can not write any other flash dump , because ECU will not respond on OBD. And yes, he must open the ecu and write it over BDM


Sent from my iPhone using Tapatalk Pro

ollync
15th July, 2019, 10:09 PM
Hi, it would be my first car (girlfriends car) and i want do things with low risk.
Thanks!

What version of Galletto or Mpps are you using?



Sent from my iPhone using Tapatalk Pro

Myjector
16th July, 2019, 08:56 AM
It all depends the sw version, make id with your galleto clone and post here. If not safe thru OBD you can BDM it with your galleto.
Even genuine tools sometimes need to BDM this ecu

alfanacleto
16th July, 2019, 10:07 AM
dont try this ecu with mpps v13 clone

adryan
16th July, 2019, 09:32 PM
It all depends the sw version, make id with your galleto clone and post here. If not safe thru OBD you can BDM it with your galleto.
Even genuine tools sometimes nored to BDM this ecu
so confused... i will trust it in a especialist

No intentes este ecu con clon mpps v13
te hare caso

Myjector
17th July, 2019, 07:05 AM
so confused... i will trust it in a especialist

te hare caso

Make ID with your tool and send it to me, i can tell you if it's safe OBD or not

adryan
30th July, 2019, 09:35 PM
............,.,.,

adryan
30th July, 2019, 09:40 PM
Make ID with your tool and send it to me, i can tell you if it's safe OBD or not


https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/reputation/reputation_green.gif





sorry for delay, i am going to buy galletto, galleto 1260 it will works for this?

ollync
31st July, 2019, 01:48 AM
Read yes, write - R.I.P


Sent from my iPhone using Tapatalk Pro

Myjector
31st July, 2019, 06:58 AM
https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/reputation/reputation_green.gif





sorry for delay, i am going to buy galletto, galleto 1260 it will works for this?




Make ID first If it is EDC16C34-5.xx you can't write OBD if it is EDC16C34-2/3.xx you can write OBD.
With Galleto you have BDM to

ollync
31st July, 2019, 07:20 AM
Make ID first If it is EDC16C34-5.xx you can't write OBD if it is EDC16C34-2/3.xx you can write OBD.
With Galleto you have BDM to

He cannot make ID first , since he is asking what tool he should buy.
And Galleto 1260 , the tool he has chosen to buy , has no BDM .
Maybe you are referring to V54 FGTech Galletto 2 .


Sent from my iPhone using Tapatalk Pro

ollync
31st July, 2019, 07:41 AM
https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/reputation/reputation_green.gif





sorry for delay, i am going to buy galletto, galleto 1260 it will works for this?




Better buy V54 FGTech Galletto 2 .
Then you can make ID on ecu like Myjector said , and you will see if it’s OBD writeable. If not OBD writeable then you have BDM option with this tool, and you can read and write but you need to open the ecu .
If you don’t have experience with that , then leave the job to a pro. My advice


Sent from my iPhone using Tapatalk Pro

Myjector
31st July, 2019, 09:08 AM
Yes i mean the V54 version

adryan
31st July, 2019, 04:55 PM
Better buy V54 FGTech Galletto 2 .
Then you can make ID on ecu like Myjector said , and you will see if it’s OBD writeable. If not OBD writeable then you have BDM option with this tool, and you can read and write but you need to open the ecu .
If you don’t have experience with that , then leave the job to a pro. My advice


Sent from my iPhone using Tapatalk Pro


Make ID first If it is EDC16C34-5.xx you can't write OBD if it is EDC16C34-2/3.xx you can write OBD.
With Galleto you have BDM to
Thanks for everything, in this case i will handle with a profesional, i always wanted to tuning ecus, and finally i found this forum.
I have a golf vi 2010 twincharger and a ibiza 2007, and im going to buy this galleto for learn.
Thanks for share your knowledgeb, is a pleassure, really!

I have this final question for you? what is easier for learning?
v54 FG Tech 0475 or KESS V2.47 (Finally ive bought a FG Tech 0475 after read some post :star:)
thanks again!!

smokin66
31st July, 2019, 05:25 PM
kess ktag mate it does checksum and new red pcb is really good,kess v2 master also good for obd read/write.
i have done alot of fords with it, dont waste your money on v54 fg tech .

adryan
1st August, 2019, 10:40 PM
Make ID first If it is EDC16C34-5.xx you can't write OBD if it is EDC16C34-2/3.xx you can write OBD.
With Galleto you have BDM to
Finally my ECU was a EDC16C34-2.20, professional could read and write via OBD.


Better buy V54 FGTech Galletto 2 .
Then you can make ID on ecu like Myjector said , and you will see if it’s OBD writeable. If not OBD writeable then you have BDM option with this tool, and you can read and write but you need to open the ecu .
If you don’t have experience with that , then leave the job to a pro. My advice


Sent from my iPhone using Tapatalk Pro
Thanks again, the procces is easy, i was talking with professional and if it goes ok like this time, is easy.


kess ktag mate it does checksum and new red pcb is really good,kess v2 master also good for obd read/write.
i have done alot of fords with it, dont waste your money on v54 fg tech .
Yes, the boy used a KESS V2, and he told me that is a safer way, but ive bought a galleto yet. XD



THANKS EVERYONE!!!