PDA

View Full Version : SKODA Superb 2 dash


peetee25
20th July, 2019, 07:07 PM
Hi, I killed superb 2 dash with changing mileage. I dont saved eeprom before changing.
Now it show error on display. Is there way to fix this dump ?
I don't need this cluster for specific car but I want to fix this error mileage.
Any ideas ?
Thanks for any help.

636929

3T2 920 940 D 24LC32 EEPROM
jomberykaso
20th July, 2019, 07:09 PM
What was the original mileage?
peetee25
20th July, 2019, 07:15 PM
244 610 km and tried to change to 0 km...
peetee25
20th July, 2019, 07:20 PM
What was the original mileage?


244 610 km and tried to change to 0 km...
jomberykaso
20th July, 2019, 07:23 PM
Could you change the mileage again to any other mileage and post it here to see where is the error in your dump?
peetee25
20th July, 2019, 07:41 PM
Could you change the mileage again to any other mileage and post it here to see where is the error in your dump?

Here it is, changed to 185 225km
jomberykaso
20th July, 2019, 07:55 PM
Does car start?
peetee25
20th July, 2019, 08:01 PM
Does car start?

I don't know if car starts because its cluster only for learning. 24c32/64 +NEC is something new for me. If you can remove error message from mileage and put in virgin mode I'll be happy. Thanks for help.
jomberykaso
20th July, 2019, 08:12 PM
I can put any mileage in this skoda but with original file, Im trying to fixing your file but your dump are damaged
peetee25
20th July, 2019, 08:17 PM
I can put any mileage in this skoda but with original file, Im trying to fixing your file but your dump are damaged

It would be awesome if you will fix my damaged dump. What about putting other not damaged dump in cluster?
jomberykaso
20th July, 2019, 08:30 PM
Report......
peetee25
20th July, 2019, 08:48 PM
Report......

Still showing error with some messages like service now, brake pads etc... but immo acitve message is not there.

EDIT: Tried to read mileage with carprog. Shows 655 350km.
jomberykaso
20th July, 2019, 09:33 PM
I see this is not the first time you make the same mistake in a similar dash.

Why are you still relying on the carprog ?, you can modify this type of boards even using upa 1.3 clone and DK calculators

Try this and report please
peetee25
20th July, 2019, 09:47 PM
I see this is not the first time you make the same mistake in a similar dash.

Why are you still relying on the carprog ?, you can modify this type of boards even using upa 1.3 clone and DK calculators

Try this and report please

It's same dash, I think it's unfixable... Still error
jomberykaso
20th July, 2019, 09:50 PM
All is possible mate....it just takes a time
peetee25
20th July, 2019, 10:00 PM
All is possible mate....it just takes a time

If you help me can I send donate to you or something?
You are giving me your time and helping me.
Thanks.
peetee25
21st July, 2019, 05:45 PM
Anyone some solution for this dash please ?
sendreq
21st July, 2019, 10:46 PM
With 655xxxkm it will show error. Change km to lower value with better tool. Probably an error will be stored „instrument cluster faulty” - reflash dash with VCP or ODIS and it will go away.
peetee25
22nd July, 2019, 06:00 AM
With 655xxxkm it will show error. Change km to lower value with better tool. Probably an error will be stored „instrument cluster faulty” - reflash dash with VCP or ODIS and it will go away.Do you have any odx file for flash this cluster?

Odoslané z ANE-LX1 pomocou Tapatalku
Ticosk
30th July, 2020, 08:54 PM
I can put any mileage in this skoda but with original file, Im trying to fixing your file but your dump are damaged

Hi, i have an error free dump of same dash. Maybe it also helps to Peetee25 somehow.
Is it really possible to change mileage via eeprom dump for 24c32/64 ?
If so then please correct mileage in attached dump like:

Current value is : 247 927
Required value: 164 230.

Many thanks in advanced.