SPC56AP54L3 reading with carprog or UPA ?

[Amadis11]

Hi, I searched the Internet, but nowhere find if it is possible to read SPC56AP54L3 with carprog. Someone on this forum mentioned that it is, but can you know how ?

I am sure that it can be readed with UPA, but how connect this microprocessor, just TDI, TDO, TCK or another pins ?

Below is pinout of microprocessor. Thank you for help.

I must read dump from Camaro 2018, it has standard GM airbag module.

637084

[rafal]

post srs unit reference............

[Amadis11]

Ok, sorry, there are pictures. There are 4 microcontrollers, but crash data should be in spc56ap54l3. Thank you.

[rafal]

numbers of srs unit ?

[pawel7924]

http://www.mina.com.ua/MAC_MPC%20PROGRAMMER/HTML/1_mac_mpc.html

OR

https://diagcar.eu/pl/programatory/175-carprotool-programmer-adapters-eeprom-programmer-activation.html
+
https://diagcar.eu/en/carprotool-activations/112-freescale-mpc560x-sc66705-st-spc560px0-programmer-activation-for-carprotool.html

[Amadis11]

Srs unit number is 13518660, that is GM airbag module, and this is main number, where 8660 is bigger. Tank you pawel7924, but people are reading it with UPA programmer, there must be possibility to connect it.