Dodge Challenger R/T -18 milage

[Alawigmx]

Hey bros.

I have a Challenger -18 with a replaced cluster. The new (used) cluster shows 3000km.

I suspect that these vehicles have 9s12 MCU, can anyone confirm and provide pinout? Thanks in advance.

[jomberykaso]

first open it, take pictures and upload them here

[Dr. Zoidberg]

......................

[Alawigmx]

Come on guys, I'm simply asking what eeproms are in these clusters.

[jomberykaso]

dont be lazy man....just open it and you will see

[Alawigmx]

dont be lazy man....just open it and you will see

I wouldn't be here asking if I had access to it my friend, would I? What eeprom is in it? Anyone have a list?

[tazz75]

BKGD PIN 13
VSSR PIN 40
VDDR PIN 41
RESET (https://www.digital-kaos.co.uk/forums/#) PIN 42
If it's 9s12dp512

[jomberykaso]

I wouldn't be here asking if I had access to it my friend, would I? What eeprom is in it? Anyone have a list?

So you are not done for this job...

[Alawigmx]

So you are not done for this job...

How many new challengers have you done?

[jomberykaso]

I don't make any car. I only edit files for other people.

[Alawigmx]

I don't make any car. I only edit files for other people.

So in your experience, what chip does the cluster contain in the files youve edited from Dodge Challengers -18?

[jomberykaso]

D70F3525....

[Alawigmx]

Is there any available connection diagram to dump the D70F3525 in the cluster? I am currently mapping the pins to find alt. points to solder, I'd rather not lift it.

638889638888

[Chuckk]

What tool do you have ? I don’t take those apart, do it from the only plug there is. 10-20 power, 19 gnd and then 12-13 data lines.

[Alawigmx]

What tool do you have ? I don’t take those apart, do it from the only plug there is. 10-20 power, 19 gnd and then 12-13 data lines.

I have CG Pro 9S12, CG-100 with NEC auth, could you please explain? been at it for 7 hours now

[clusters]

OBD, either in the car with a gateway bypass or on the bench. On the bench you can't do the SRI in the ECU, so you might as well write the old mileage on the windshield with a grease pencil, any scantool can see it in the ECU.

None of your tools will do that cluster.

[Alawigmx]

OBD, either in the car with a gateway bypass or on the bench. On the bench you can't do the SRI in the ECU, so you might as well write the old mileage on the windshield with a grease pencil, any scantool can see it in the ECU.

None of your tools will do that cluster.

Last cluster had a cracked cover, the plastic shield, this one is showing 60000km

I also have FVDI 18, Digiprog, DSP3+ clone, CAN adapter, Digimaster 3 and x300m. I know its possible, what I don't know is why you insist on mocking instead of helping out.

[Alawigmx]

Anyone NOT here to rip?

[dubb45]

can be programmed via OBDII check out ALFAOBD, it can even change the Part Number of the cluster as well.