Rexton immo off needed

[jomberykaso]

Hi all members,

I need immo off for this ecu please.

Brand: Ssang Yong
Model: Rexton
Year: 2005
Engine : 2.7
eeprom : 95160

638260638262

I will press Thanks + Rep for help received...Thanks in advance

[Stopro92]

I only have Ecu Vonix's solution for this, but I have no idea if it works. If you want I can upload.

[baygrozdan]

tested solution. disconect immo ring before connect ecu. put 8C in registry status to lock the eeprom.

[jomberykaso]

Hi mate I made all you wrote here and car started only once and then it stopped. Then car didn't start any more.

[lion0304]

Hi all members,

I need immo off for this ecu please.

Brand: Ssang Yong
Model: Rexton
Year: 2005
Engine : 2.7
eeprom : 95160

638260638262

I will press Thanks + Rep for help received...Thanks in advance

Here your file OFF.

Do as instruction and start the car

[jomberykaso]

Hi lion0304, I made all your procedure and When I put your immo off file immo light turn off but car still doesn't start.

Thanks for help me

[fabrag]

Hi lion0304, I made all your procedure and When I put your immo off file immo light turn off but car still doesn't start.

Thanks for help me


This is a tested solution:
-disconnect immo antenna
-write protect eeprom!!

if this file is the same as the others then most definetely you did not WP eeprom and/or did not disconnect immobilizer coil... ;)

[jomberykaso]

This car is very strange. Car has not immo coil and key has not transponder.

[fabrag]

Strange...did u write protect e2p? (8c if u use upa)

[jomberykaso]

Yes mate I wrote 8C to protect eeprom.

I made others rexton without problems but this is different.

Thanks for your help and time.

[baygrozdan]

did you managed to start the car ?

[jomberykaso]

Not yet mate.

[fabrag]

if you dont already have u can give this a go... clear all dtc's..
(did u try with eeprom desoldered?)

[baygrozdan]

I already gave this solution to him, but car starts only once.

Did you read eeprom desoldered ?

And as fabrag said, you can try to start the car with desoldered eeprom. It should start but limited to 1000rpm I think.

You can also look for the antena hidden somewhere near the wheel with transponder in it.

[jomberykaso]

if you dont already have u can give this a go... clear all dtc's..
(did u try with eeprom desoldered?)

When I read any eeprom I always remove eeprom from pcb

[fabrag]

When I read any eeprom I always remove eeprom from pcb

i mean: start without eeprom at all ... :)

[jomberykaso]

I will try it.

Many thanks to all for help me

[jomberykaso]

i mean: start without eeprom at all ... :)

I tested this. Car still doesn't start without eeprom.

[lion0304]

Hi lion0304, I made all your procedure and When I put your immo off file immo light turn off but car still doesn't start.

Thanks for help me

This method oFF i made many for others whithout issue. key no transponder maybe immo by remote?

Yes it's weird this car. Also does eeprom it original and no one magnipulated?

[baygrozdan]

Did you try another shot with my file ? Did the car start again only one time ? If yes, try to read and compare dumps after first start. If they are different, eeprom is not locked. Try to change it with another 95160.

[jomberykaso]

This is the first time I had problems with this model.

[Alexsandersm]

Here your file OFF.

Do as instruction and start the car

I need this instructions, can you send me the password please?

Thanks in advance