View Full Version : MPPS 13.02 with Passat 3C 1.9 BLS R4 1,9L EDC G000SG

27th July, 2019, 01:55 PM
Hi Guys,

my tool is a MPPS v13 china clone - Software is Mpps v12.

i did a readout on my Passat with MPPS setting 1.9 BOSCH TDI PD 16U34 K-LINE/CAN

Bosch Hardware Number: 03G906021AB
Vw Software Number: 03G906021RQ
System Type Number: R4 1,9L EDC G000SG
Ecu Found on Can

worked and gave me 2048KB did it 3 time with filecompare - always the same
sent the file to tuner and he remapped and did the new checksum

now i should flash it back - my question is - is it SAFE to flash with that Hardware: MPPS V13.02 (SE74)? I dont want to brick ECU... or ist it safe anyways as it only writes back the DATA AREA READ ONLY?

In Step 2 - can somebody revie my tuning fille and tell me the opinion - thanks

Thanks in advance?


28th July, 2019, 01:28 PM
maybe someone has a full read(BDM...) of it and is willing to share with me - thanks in advance!

Ecu Prod. 03G906021RQ
Ecu Stage Number 03G906021AB
Software 391588
Software Version 1843

29th July, 2019, 04:05 PM

1st August, 2019, 10:13 AM

With a clone you are always taking a risk, I have learnt the hard way. I managed to remap my a2 using the clone but failed and bricked my ECU on my skoda octavia. Question is how hard is it for you to take the ECU out the car if you do managed to end up bricking it? And you will then need to buy a BDM reader, if you plan to do it yourself. Personally I would do it but again are you willing to take the risk??

Sorry cannot review your file as I don't know how to.