PDA

View Full Version : Renault Clio RS Sagem S3000 read



sdtsedat
30th July, 2019, 12:40 PM
Hi,

someone have idea how to read renault clio RS 2.0i 200hp with Sagem S3000 ecu?
I try kess, no read

I try bench pinout with kess, it does id but no read
I try now with fgtech, but doesnt read


Someone idea? If fgtech read is it safe to write?

Myjector
30th July, 2019, 12:47 PM
Did you let cool down the car? And disconnect battery and reconnect and then try OBD?
Obd should work

sdtsedat
30th July, 2019, 01:30 PM
Yes, indeed under 50 degree celciius and it will read
thanks!

thread closed

bigbang63
6th November, 2021, 11:30 AM
you just need to disconnected the sensor to allow the read.

carmageddon
6th November, 2021, 11:57 AM
i have also tested with liquid motor disconnected and dont work via obd....i made this ecu on the bench

kamil1234
6th November, 2021, 03:52 PM
Megane rs sagem 3000 is not a problem to read and write even at 90 degrees in obd. Kess clone.

elektronik325
7th November, 2021, 10:39 AM
Kess ori does it without a problem after obd. You can also do Ktag. Then the mass fuul reading the ecu.