View Full Version : Renault Clio RS Sagem S3000 read
sdtsedat
30th July, 2019, 12:40 PM
Hi,
someone have idea how to read renault clio RS 2.0i 200hp with Sagem S3000 ecu?
I try kess, no read
I try bench pinout with kess, it does id but no read
I try now with fgtech, but doesnt read
Someone idea? If fgtech read is it safe to write?
Myjector
30th July, 2019, 12:47 PM
Did you let cool down the car? And disconnect battery and reconnect and then try OBD?
Obd should work
sdtsedat
30th July, 2019, 01:30 PM
Yes, indeed under 50 degree celciius and it will read
thanks!
thread closed
bigbang63
6th November, 2021, 11:30 AM
you just need to disconnected the sensor to allow the read.
carmageddon
6th November, 2021, 11:57 AM
i have also tested with liquid motor disconnected and dont work via obd....i made this ecu on the bench
kamil1234
6th November, 2021, 03:52 PM
Megane rs sagem 3000 is not a problem to read and write even at 90 degrees in obd. Kess clone.
elektronik325
7th November, 2021, 10:39 AM
Kess ori does it without a problem after obd. You can also do Ktag. Then the mass fuul reading the ecu.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.