PDA

View Full Version : SAAB trionic t7.7 immo off advice



Panathaole
31st July, 2019, 05:39 PM
Hi

I need to make immo off a Saab trionic t7.7 ecu.....

It is possible with common tools?

As I have read the flash is not enough to make immo off, I have to read the mcu too.

I can't find emulator for this ecu...

Any info?

Thank's

droidwayne65
31st July, 2019, 09:57 PM
Hi

I need to make immo off a Saab trionic t7.7 ecu.....

It is possible with common tools?

As I have read the flash is not enough to make immo off, I have to read the mcu too.

I can't find emulator for this ecu...

Any info?

Thank's
A 29BL802 flash? Post your dump and let's have a look. :)

Meat-Head
31st July, 2019, 10:02 PM
If you look on YouTube seems to be few Vauxhall’s with Saab engines, if that helps
worth asking around

Panathaole
31st July, 2019, 10:47 PM
It's possible to do immo off only with flash?

That's good news, I open up tomorrow the ecu to check the flash chip....

I can't find any info about this ecu on Opel cars, only in Saab....

Panathaole
1st August, 2019, 01:00 PM
The flash is AM29f400bt, the immo is in flash?

If yes I desolder and post dump...

640012

droidwayne65
1st August, 2019, 02:44 PM
The flash is AM29f400bt, the immo is in flash?

If yes I desolder and post dump...

640012
Read and post the dump. I've done a few of those on 95 models but can't tell until I see the dump. :D

Bllinda
1st August, 2019, 04:45 PM
The flash is AM29f400bt, the immo is in flash?

If yes I desolder and post dump...

640012
Don't waste your precious time.
unless you have nothing to do


Read and post the dump. I've done a few of those on 95 models but can't tell until I see the dump. :D

Panathaole
1st August, 2019, 09:27 PM
Don't waste your precious time.
unless you have nothing to do



no way by flash?

can you suggest something Bllinda?

i try in car with elm327 (get can h can l from screen), but no luck......

i give a try on bench with elm327, i read, many read that ecu with elm.....

droidwayne65
1st August, 2019, 09:37 PM
no way by flash?

can you suggest something Bllinda?

i try in car with elm327 (get can h can l from screen), but no luck......

i give a try on bench with elm327, i read, many read that ecu with elm.....
Again I say, read and post the flash, if just for my curiosity, LOL! What do you have to lose, other than 15 minutes of effort. :biggrin:

Panathaole
1st August, 2019, 10:30 PM
Again I say, read and post the flash, if just for my curiosity, LOL! What do you have to lose, other than 15 minutes of effort. :biggrin:

:giveup::giveup:i give up.... i try to desolder tomorrow, i desolder from one side, pin by pin, chip is stuck in pcb, i have no acetone right now.... and that chip is so stucking....

i am gone break it..........:mad-new::mad-new::mad-new:

droidwayne65
1st August, 2019, 10:47 PM
:giveup::giveup:i give up.... i try to desolder tomorrow, i desolder from one side, pin by pin, chip is stuck in pcb, i have no acetone right now.... and that chip is so stucking....

i am gone break it..........:mad-new::mad-new::mad-new:
LMAO!! Serenity now, serenity now! :rofl:

Panathaole
2nd August, 2019, 08:58 AM
original flash from saab...

640229

droidwayne65
2nd August, 2019, 01:34 PM
original flash from saab...

640229
Well, different addresses and an additional subroutine but I'll give it a shot. :biggrin:

droidwayne65
3rd August, 2019, 12:06 AM
Here ya go. Cross all twenty and maybe your eyes too. J/K :biggrin:

cesar gamez
14th November, 2019, 05:03 PM
HOLA
NECESITO HACER INMO OFF A UN SAAB 95 AERO
MODELO 2001 CON UNA ECU TRIONIC 7
CON UNA FLASH AM29F4OOBT

SI ALGUIEN ME PUDIERA AYUDAR LO AGRADECERIA}

SALUDOS..

Bllinda
14th November, 2019, 05:54 PM
Do you believe in it yourself? :)


Here ya go. Cross all twenty and maybe your eyes too. J/K :biggrin:
SAAB29F400BT_IMMO_OFF_8bit.zip (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=640426&d=1564787157)

Percha
23rd November, 2024, 12:14 AM
Is not possible by reading directly?

Panathaole
23rd November, 2024, 08:36 AM
Is not possible by reading directly?

You can read it by obd, or on bench, no need to desolder anything.....