PDA

View Full Version : KTAG PSU - Voltage?



AranoX
6th August, 2019, 09:17 AM
Hi Guys!

Got a short question since im currently trying to read/write my ME7.1.1 with KTAG.
Currently im using a modified PC PSU with 12V 13A max., EDC17 etc. is no Problem till now, but ME7.x needs more power, as i read about 13,5V+.

I also got some different PSUs here: 14V 2,14A and 15V 6,00A


My concerns are if the 14V PSU has enough Amps to power ME7.x and if the 15V PSU will damage anything.

Anybody got experience with this?

Regards.

bazaa
16th August, 2019, 05:49 PM
Hi found this link might help you

http://blog.obdii365.com/2015/12/15/ktag-can-not-read-audi-s4-me7-1-1/

Lambda1
16th August, 2019, 08:49 PM
Why dont get usefull power supply?
There are good and cheap onces for under 60 dollars where you can regulate...