banalac
6th August, 2019, 02:43 PM
Hello All,
I have a Skoda Fabia 1.4 MPI with 047906033C Siemens ECU.
I think when I made a throttle valve adaptation after cleaning, the damn Chinese VAG-COM 409.1 adapter cable caused some problem in the ECU SW.
Now the car stalls, there is a lumpy idle and when accelerating the engine is jerking and have error codes appearing.
I bought a used ECU, but I'm not able to read out the EEPROM content nor of the original, not of the spare ECU.
I was able to read out the PIN code of the instrument cluster (which is the same PIN as the original ECU) with VAG K+CAN Commander.
Please give me a hand and give some advice what HW and SW needed to download the EEPROM content of the spare ECU. How can I get the PIN of the spare ECU?
Or how can I re-program/reset the original ECU?
I have:
- VCDS HEX V2 18.9.0
- VAG K+CAN Commander 3.6
- VAG-COM 409.1
Thanks in advance!
I have a Skoda Fabia 1.4 MPI with 047906033C Siemens ECU.
I think when I made a throttle valve adaptation after cleaning, the damn Chinese VAG-COM 409.1 adapter cable caused some problem in the ECU SW.
Now the car stalls, there is a lumpy idle and when accelerating the engine is jerking and have error codes appearing.
I bought a used ECU, but I'm not able to read out the EEPROM content nor of the original, not of the spare ECU.
I was able to read out the PIN code of the instrument cluster (which is the same PIN as the original ECU) with VAG K+CAN Commander.
Please give me a hand and give some advice what HW and SW needed to download the EEPROM content of the spare ECU. How can I get the PIN of the spare ECU?
Or how can I re-program/reset the original ECU?
I have:
- VCDS HEX V2 18.9.0
- VAG K+CAN Commander 3.6
- VAG-COM 409.1
Thanks in advance!