PDA

View Full Version : FRM BMW E9X-E8XCA-NSW FRMFA HELP



GERCOMOTIVE
7th August, 2019, 12:08 PM
Hello good morning everyone, I have an FRM of a bmw e90 year 2006.


It has several fault codes registered in the lights.


I have already seen these types of failures before in other cars.


My idea was to read the ST10F269 microprocessor to be able to flash it


and then code it with AUTEL.


I need the PINOUT to read this processor with XPROG


Do you think this will be the solution?


Thanks in advance641438641439641440641441

tomic19
7th August, 2019, 12:14 PM
Eh sorry, wrong FRM pinout I have

joker01
7th August, 2019, 12:26 PM
look at this pinout if you can serve ......
frmfa should be frm1 you can try tool32 to do a reset counter without reflashing

GERCOMOTIVE
7th August, 2019, 12:44 PM
THANKS FOR THE CONTRIBUTION, THE PINOUT DOES NOT CORRESPOND BUT I HAVE ALREADY READ IT :)

GERCOMOTIVE
7th August, 2019, 12:47 PM
look at this pinout if you can serve ......
frmfa should be frm1 you can try tool32 to do a reset counter without reflashing


THIS PINOUT IS THE RIGHT, I HAVE GOT READ IT WITHOUT PROBLEMS. CAN SOMEONE RESET THIS COUNTER WITH THE READING OF THE MPC?


I do not have the program you say nor the vehicle ONLY I HAVE FRM


THANKS

GERCOMOTIVE
7th August, 2019, 12:49 PM
THE READING I MADE IS THIS


Could someone flash the mpc or reset the FRM fault counter?


Thanks in advance

GERCOMOTIVE
7th August, 2019, 02:55 PM
please help me

joker01
7th August, 2019, 08:36 PM
friend I'm not able to reset counter from micro dump ..... but I'm not sure that the counters are stored there on frm1 ......
from my information you need to restore an e2p 95320 .....
see if there is reading on your pcb and post.
we can do a test if you want ......

GERCOMOTIVE
8th August, 2019, 08:21 AM
friend I'm not able to reset counter from micro dump ..... but I'm not sure that the counters are stored there on frm1 ......
from my information you need to restore an e2p 95320 .....
see if there is reading on your pcb and post.
we can do a test if you want ......


Hello good morning, thank you very much for your help.


This is the reading of the original epp 95320.


let's see if it's possible to reset it


thank you

flashtech
8th August, 2019, 09:16 AM
Counter can be reseted with Tool32. There is no need to flash mpc or something..

GERCOMOTIVE
8th August, 2019, 11:06 AM
Counter can be reseted with Tool32. There is no need to flash mpc or something..

Is the vehicle necessary or can you pin the Ecu in the bank and do it with TOOL 32?

flashtech
8th August, 2019, 12:05 PM
I allways do it on vehicle, so i don't know unfortunately..

GERCOMOTIVE
8th August, 2019, 05:43 PM
I allways do it on vehicle, so i don't know unfortunately..


thank you very much for your help

joker01
8th August, 2019, 09:33 PM
try and report......................

95320 fixed.......

GERCOMOTIVE
9th August, 2019, 01:31 PM
try and report......................

95320 fixed.......

Ok I will try it and tell you something, thank you very much for the help :)

GERCOMOTIVE
13th August, 2019, 08:38 AM
I still have not been able to test your file, the car is brought to me next week at the workshop,


Anyway I will keep you informed, thank you all

ascotauto
21st August, 2019, 03:53 PM
Hi

I am hoping you guys can help me too.
I have same FRM from a E90 windows are not working
can u reset the frm of mine aswell please.
thanks in advance

joker01
21st August, 2019, 08:34 PM
Hi

I am hoping you guys can help me too.
I have same FRM from a E90 windows are not working
can u reset the frm of mine aswell please.
thanks in advance


try..................

usually frm1 not from communication problems with windows and crazy lights ......

ascotauto
23rd August, 2019, 12:10 PM
Hi joker thanks for your help your file worked. But the problem on my FRM was the actual relays for the windows it was burnt.
see picture attached

GERCOMOTIVE
26th August, 2019, 05:33 PM
Hello to all friends,


I have managed to solve the FRM, I leave a file of memory 95320 that is OK.


Simply write file and then encode ECU.


a greeting

joker01
26th August, 2019, 08:44 PM
hello ... thanks for sharing .... but with my file was wrong ??

Alexsandersm
1st February, 2021, 09:07 PM
Hi

I am hoping you guys can help me too.
I have same FRM from a E90 windows are not working
can u reset the frm of mine aswell please.
thanks in advance

Hello Guys;

I'm on a same situation here. A FRM1 (E9X-E8XCA-XE PL2 FRMFA S: 6135 6987999-01 AW: 6988007 SW: 57000 HW: 10) with same simptoms (lights and windows not working).
Somebody can reset the file from 95320 to help me?

782031

Thanks in advance