Clio II immo off S2000 with julie renault emulator

[Fuller]

Hi I have Clio II with sagem s2000 ecu I bought Julie emulator for Renault like the one in the 3th picture and I connected then to the ECU and program the eeprom 95080 as in the instructions but I don't know what i should doing when first change of program doesn't work. Should I use only secound change or maybe first and secound?If i program 95080 and connect ecu to car and read eeprom again the values was changing
I cut the two pair of CAN wires coming to the uch and I linked them together but the car only cranking few secounds and doesn't start. Ecu doesn't attach fuel relay

[tazz75]

Hy..post dump here 95080

[Fuller]

Hy..post dump here 95080
Thats dump from 95080 but I think someone changed them before me.

[tazz75]

Try first with test2.bin ..and if not work try test1.bin..but i think test2 will be good for you ...and report pls..

[Fuller]

I tryed dump just like test2 but not work but i haven't testet them with emulator


Try first with test2.bin ..and if not work try test1.bin..but i think test2 will be good for you ...and report pls..
I tryed your dump but not work i set status register to 8C and still not work