View Full Version : Touareg V10 DPF switch
chli1976
15th August, 2019, 12:09 PM
Can someone confirm the the adress from DPF switch 6EA64
pike
15th August, 2019, 12:16 PM
Hi,
not correct adress.
drewdom
15th August, 2019, 12:26 PM
Check this one and compare:
Lambda1
16th August, 2019, 09:57 AM
For EDC16 DPF off in VAG, search for dpf hysteresis and zero it out.
chli1976
16th August, 2019, 05:43 PM
For EDC16 DPF off in VAG, search for dpf hysteresis and zero it out.
Do you know the name in damos
chli1976
16th August, 2019, 06:33 PM
Now i search in Damos for EGT_swtEGTActv_C. 7F FF 80 00 00 00 02 8F 01
In my file the switch on this adress is 00
@Lambda1 if you know please send me ID in Damos for hysterese
johak
16th August, 2019, 08:36 PM
Now i search in Damos for EGT_swtEGTActv_C. 7F FF 80 00 00 00 02 8F 01
In my file the switch on this adress is 00
yes, in your file dpf switch is off
Lambda1
16th August, 2019, 08:47 PM
Havent got damos for your file ... :/.
Mostly will be named as hys.
chli1976
17th August, 2019, 12:44 PM
yes, in your file dpf switch is off
It`s strange this file is made from an sgo
joker01
17th August, 2019, 01:18 PM
with what was the file read ??? I see 512mb .... usually 2mb.se is a partial reading maybe dpf switch is not in the data ........
chli1976
17th August, 2019, 02:13 PM
Dont read it, made it with an sgo file
Car has a dpf off, but it seems it`s not right
Byteshooter reads 512kb, Kess does read 2048kb but all other adresses are FF
@drewdom your changes are in this map (32bit) (picture), should i change all to 0
In the file what was made from other one there is switch this "Freigabe oder Sperren der LSU-Funktionen - 1: ON, 0: OFF" LSU_swtVal_C
drewdom
17th August, 2019, 02:41 PM
Dont read it, made it with an sgo file
Car has a dpf off, but it seems it`s not right
Byteshooter reads 512kb, Kess does read 2048kb but all other adresses are FF
@drewdom your changes are in this map (32bit) (picture), should i change all to 0
In the file what was made from other one there is switch this "Freigabe oder Sperren der LSU-Funktionen - 1: ON, 0: OFF" LSU_swtVal_CIs glow light flashing?
chli1976
17th August, 2019, 03:18 PM
Don`t flash it until now, have car not here
drewdom
17th August, 2019, 04:40 PM
So You need to switch of dpf or just to know how to do?
alonedark
17th August, 2019, 04:52 PM
I think you NEed read Two Ecus master and slave ecu
chli1976
17th August, 2019, 06:35 PM
Have read both ecu`s, it`s the same file
Yes i will know how to switch off the dpf in the right way, my notes for the other PD ecus does not match
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.