Fiat Stilo 2002y petrol

[art64]

Hello, I have a car with lost key Fiat Stilo petrol (ecu Magneti Marelli IAW5NF and Magneti Marelli BCM). Please, help me to find out which way is easyest to get pin code (from ECU or BCM)? I know in BCM is the processor MC9s12dg256b (mask 1K79X) and in ECU I supose is a flash memory. Thank you

[rafal]

https://www.digital-kaos.co.uk/forums/showthread.php/592809-Fiat-stilo-IAW-5nf-pin

[art64]

I did read ECU with Galetto, but it seams just the flash memory. For a pin is necessary eeprom? I have some difficulties in opening ecu. Is it some hints on it?

[jolidj]

for new key you need pincode , need new trasponder and precode it , after you can adapt it with diag. ore open body fail with zed and insert new trasponder id on fail and after write it back on bady.
the esy way is to read eeprom from ecu and do immo off on it.

[rafal]

for pin read eeprom of ecu or bcm

[art64]

Hello, one more time :) I did read BCM memory. Can somebody extract pin from BCM eeprom for me, please ? Thank you

[Jimalex]

... pin 54229

[art64]

Thanks. Pin ok, just started in emergency mode (without chip). Which chip is necessary for programming? I did try with old vw ID48 (not locked) - not works :) Available just Zed Bull

[art64]

A right transponder (ID48) and Zed B solved problem. The car start but sometimes I'm getting dtc '0602 CANline Error, Bus off' and a car cranking but not starting for awhile. What does it mean?