please egr and dtc off Opel Astra G 2.0 DTI EDC15M X20DTL 0281001674

[ParamoTronic]

hi guys!

I need dtc off p0400 and egr off.

Any solution?

thanks in advance!

[EGS]

Hi, your file. If it work fine, press thanks and reputation bottons. Bye
Pass in PM.

[a500tut]

Try my solution!

[P2XA]

Hi!Can your dtc of on Opel msa 15.5?

[bobolin4o]

Hi!Can your dtc of on Opel msa 15.5?

Post the file, mate... then ask...
What engine, BMW TDS?

[P2XA]

Engine is vm41b 2.5tds.need to off dtc:P1635, P1639,P1590

[bobolin4o]

There is only P1635 in the file...
Check again.

[P2XA]

P1636,P1650,P1655

[bobolin4o]

there is no p1655 and p1636...
have P1635 and P1650.
Tell me what is the story of this?

[P2XA]

glow plug relay broken and car don't have full acceleration
if dtc cleared and ignition on 2 faults on ecu p1635 and second no don't remember well about glow plug relay output signal may be p1640

[bobolin4o]

glow plug relay broken and car don't have full acceleration
if dtc cleared and ignition on 2 faults on ecu p1635 and second no don't remember well about glow plug relay output signal may be p1640

Here...
The checksum is ok.

[P2XA]

Ok!I see 4dtc's off

[P2XA]

Hi!need to dtcoff but i can't my winols 1.5 and 1.721 can't open this mod files show message:"This software version cannot be processed, since it is already modified."
need off this dtc's:P0400,P1635,P1650,P1690

[volorucinski]

Engine is vm41b 2.5tds.need to off dtc:P1635, P1639,P1590

Bad fuel pump. Fix it. Egr either.

Can someone make Driver Off on these cars forever?

[bobolin4o]

Hi!need to dtcoff but i can't my winols 1.5 and 1.721 can't open this mod files show message:"This software version cannot be processed, since it is already modified."
need off this dtc's:P0400,P1635,P1650,P1690

call this guy - Taurius, +37067622XXX

Here is unlocked file.

[P2XA]

problem in winols?

[bobolin4o]

Nope, just "noread mark"
regards!

[P2XA]

Can your unlock this dumps?

[bobolin4o]

As you saw - yes i can.
I gave you the file already!
Put it in WinOls and go ahead...

[P2XA]

Hi!now check on a table 3dtcs not shown but p1690 active706753

[bobolin4o]

Hi!now check on a table 3dtcs not shown but p1690 active706753

Mate... i really don't understand you...
This screenshot is from?
First you asked for dtcs off for one Frontera, than you ask for unlocking files from another Frontera...
First i gave you a file with deleted dtcs, which you wanted (even you was not sure which they are).
Now you posted a photo with dtc, which was not requested to delete.
Maybe you think, that i've delete these dtcs in the unlocked file? It is your file, untouched, with just deleted "noread" mark, so you can open it in winols.
So, what happened here?

[P2XA]

This is for one car but for more power.
I wanted to disable error codes for tuning firmware, but these 2 tuning files were lost on my computer and I had to read it from the control unit and now I had access to the block, I read these firmware ...

[bobolin4o]

So, you have the first my file (with deleted errors) and you have your ~~~~ing mod file already.
Study on my changes and do yourself deleting desired error codes.
I am not a 24/7 free file service here!

[P2XA]

I do changes like in you file 3dtc's off but p1690 active,i want to know how erase this error...
Thanx for you support!!!

[bobolin4o]

But in my file P1690 is untouched... just do it like the others!

[P2XA]

Yes!i think i found my mistake





706770

[bobolin4o]

OMG... use winols, mate... what about the checksum?
And, there is another one 1690, which is active.
Here are the files, flash them.

[P2XA]

Hi!please look at here:707178
I think it need mod also!
Hm-m,strange minor error...
or it's for other dtcs