PDA

View Full Version : Peugoet boxer Immo and mill off 281010346 EDC15C7


carsandkeys
20th August, 2019, 05:57 PM
Hi,

I have this Peugeot Boxer 2.0HDI, year 2004 with corrupted eeprom in immobox, then cannot recognized the key. Here dump of immobox and ecu, I need immoff, u1600 off and checksum correct please.
rafal
20th August, 2019, 06:08 PM
...............................
carsandkeys
20th August, 2019, 06:12 PM
...............................
Thanks i will test and reply
carsandkeys
21st August, 2019, 05:10 PM
...............................

Cars start ok! Not mill but when accelerating the engine fault light comes on, this show fault in precalentator relay. i check the relay and this is ok. error P0380 and i cannot delete this fault code.
rafal
21st August, 2019, 05:32 PM
make virgin in eeprom and all will be ok
carsandkeys
27th August, 2019, 10:37 AM
Same problem with virgin eeprom.
EGS
27th August, 2019, 10:59 AM
I don't think the error P0380 is related to the immooff. That dtc refers either to the glow plug circuit or to the supply of the sensor group A.
copland
6th September, 2019, 04:48 PM
The P0380 is probably the preheating box and this error don't light on on the dash.
Have you find solution for your problem ?
On my fiat ducato edc15c7 0281010346 i have dtc OFF U1600 and disoldered the 5P08C3 and dtc OFF the P0601 faulty eeprom and no problem when I press pedal now.
carsandkeys
6th September, 2019, 07:28 PM
The P0380 is probably the preheating box and this error don't light on on the dash.
Have you find solution for your problem ?
On my fiat ducato edc15c7 0281010346 i have dtc OFF U1600 and disoldered the 5P08C3 and dtc OFF the P0601 faulty eeprom and no problem when I press pedal now. The problem has not been solved yet, the ecu was open from another workshop that had tried to repair the problem of the immobilizer. maybe they damaged something, preheating box was checked, all ok. I only received the ECU to check the immobilizer, inmobox is faulty and realized immoff, the client took the van to claim the previous mechanic workshop
copland
6th September, 2019, 09:02 PM
I have send to you the modified file with immo off, but that work only without the 5p08c3 and dtc off on p0601...I don't know if its proper but work correctly under my van.
If you find best solution, i'm interested :)