JFR-Tuning
22nd August, 2019, 07:31 AM
Fo all members here this MANUEL Tip
if you Programm a Key or work on this Audi s and you disconnect Batterie, or Injektion is on and you don’ t can remove the key here the Manuel for this problem ( testet on AUDI Q 5 2012 and Audi A5 2010
You Need Avdi
1.
disconect batterie > you can remove key
2.
disconect all plugs min 60 min Bcm2 in the right side of trunk
3.
conect Bcm2 and Batterie
4.
put a key in Injektion
5.
AVDI > specials > theftprotection> Audi A5 Start
sometimes it give result not posible> no worry
6.
go to BCM2 keys > Start and you will have now connection again to the BCM 2
learn keys eyes again and after that all works fine
never change soft or open Bcm2 for the job
TIP !! Save after first connection Data of Bcm2 before you program keys. Test key before you start key learning AND PROGRAMM EACH CHINA KEY TO A DEALER KEY
then start key learning.
my Problem was that the key was a damaged key and the programming stop with Injektion all time and can‘t remove key.
if you Programm a Key or work on this Audi s and you disconnect Batterie, or Injektion is on and you don’ t can remove the key here the Manuel for this problem ( testet on AUDI Q 5 2012 and Audi A5 2010
You Need Avdi
1.
disconect batterie > you can remove key
2.
disconect all plugs min 60 min Bcm2 in the right side of trunk
3.
conect Bcm2 and Batterie
4.
put a key in Injektion
5.
AVDI > specials > theftprotection> Audi A5 Start
sometimes it give result not posible> no worry
6.
go to BCM2 keys > Start and you will have now connection again to the BCM 2
learn keys eyes again and after that all works fine
never change soft or open Bcm2 for the job
TIP !! Save after first connection Data of Bcm2 before you program keys. Test key before you start key learning AND PROGRAMM EACH CHINA KEY TO A DEALER KEY
then start key learning.
my Problem was that the key was a damaged key and the programming stop with Injektion all time and can‘t remove key.