PDA

View Full Version : Opel Corsa d can't reset ipc



Panathaole
23rd August, 2019, 05:27 PM
Hi.

After battery problem, an Opel Corsa d 2008 won't start, i retrieve code from radio,

And resetting bcm and airbag but I can't reset ipc

Code not accepted and have waiting time 10 minutes, what I am doing wrong?

I have b3902

rafal
23rd August, 2019, 06:11 PM
1 reset IPC
2 reset bcm
3 reset airbag SDM
4 reprog key
5 turn ignition off for 30 sec
6 reprog IPC
7 reprog BCM
8 reprog airbag SDM
9 clear all dtc's
10 turn ignition off for 30 sec
11 START CAR and reprog any other keys

Do not reset ECM before or at the same time as BCM is reset, otherwise data about the vehicle's key can be lost which would require new key transponders

Panathaole
23rd August, 2019, 07:13 PM
Thanks Rafal, that's exactly I am trying, but I can't reset lPC

I have wait 10 min,. code NOT accepted.....

All the other module I can reset....

rafal
23rd August, 2019, 07:15 PM
Thanks Rafal, that's exactly I am trying, but I can't reset lPC

I have wait 10 min,. code NOT accepted.....

All the other module I can reset....

maybe ipc corrupted................read dash and post dump here please

3inferno3
23rd August, 2019, 08:19 PM
Use Op-com to do this... before reset ipc You have reflash op -com downgrade till 1.38 or something like that.. download previous flash dumps and software. is on free in internet.. newest op-com firmware can't reset ipc.. I remember how was in my case..after downgrade i reset ipc and car strart ;) cheers ;)

Panathaole
23rd August, 2019, 08:28 PM
Use Op-com to do this... before reset ipc You have reflash op -com downgrade till 1.38 or something like that.. download previous flash dumps and software. is on free in internet.. newest op-com firmware can't reset ipc.. I remember how was in my case..after downgrade i reset ipc and car strart ;) cheers ;)



so you think is op-com the problem? I have 1.95

i try and with delphi 2016.. but nothing...

3inferno3
23rd August, 2019, 08:32 PM
My was 1.70 or something like that...he couldn't reset ipc..after downgrade 1.39 few seconds ipc was reset and program with BCM. car run in 1 minute... search on webside problem with IPC reset and downgrade OP-COM.. case was solved many times :D ;) I did specialy for you guys pic. ver 1.39 :D

jakesman
23rd August, 2019, 08:45 PM
did u wait 10 minutes with key ON and see if waiting time clear ?

Panathaole
24th August, 2019, 06:43 AM
I wait a few minutes but I didn't see any countdown..

It has to show's countdown at the screen right?

brend
24th August, 2019, 01:21 PM
First, it would be good to know what errors are in the ecu's!!!
How you know like problem in ipc?
Better load dash dump for get correct pin code.

And I think your's car is Opel corsa-C not D.


Hi.

After battery problem, an Opel Corsa d 2008 won't start, i retrieve code from radio,

And resetting bcm and airbag but I can't reset ipc

Code not accepted and have waiting time 10 minutes, what I am doing wrong?

I have b3902

jakesman
24th August, 2019, 06:52 PM
nope it do not show count down , maybe if u exit the ipc and go back in it will show other time , but normaly u wait the waiting time , i had one that a locksmith locked for 20 hours and i had to put chacer and let it stay on for that full time , if u ignition offf before waiting time have passed , it stay the same

Panathaole
24th August, 2019, 10:47 PM
solved...

fortunately my op com works ok..... the problem has the waiting time.....

the only issue i have now is to put a virgin dump in cd30 mp3, the dump is corrupted and i cant program it..

i was lucky, because i take the code from the radio, and it was correct......

Thank everyone......

3inferno3
26th August, 2019, 11:47 AM
After downgrade firmware is no waiting time :D in two seconds ipc reset done. and program :D and car start like charm :D

Panathaole
26th August, 2019, 12:26 PM
After downgrade firmware is no waiting time :D in two seconds ipc reset done. and program :D and car start like charm :D

really?

i am thinking to buy another one and make that changes, i don't want to play with that i have now, it works good......

rafal
26th August, 2019, 12:55 PM
solved...

fortunately my op com works ok..... the problem has the waiting time.....

the only issue i have now is to put a virgin dump in cd30 mp3, the dump is corrupted and i cant program it..

i was lucky, because i take the code from the radio, and it was correct......

Thank everyone......

well done ........ good luck

pocinas
11th December, 2019, 12:59 AM
Hi lads..if i writed many times wrong pincode to access bcm and now is like in photo.

Did you know procesure for reset this

Thnxhttps://uploads.tapatalk-cdn.com/20191210/252c3a062e56917e38ed08880118d4f5.jpg