Amarok ecu coding

[pouleddy]

hi, did any one know how coding BRAND NEW ecu for Amarok 2012 EDC17CP20?, i adapt the ecu to immo dash its done on the bench, but the problem about to coding, i use vcds and when i prepare the coding from vcds menu the vcds can't do it (coding rejected), any info or procedure to how coding this ecu?, i use also odis offline and same problem... please any help...thank you in advance....

[Pyromaniak]

Is configuration same?

You have propably wrong code ?

I think you need different configuration.

[pouleddy]

Is configuration same?

You have propably wrong code ?

I think you need different configuration.
i prepare the coding by vin number i think coding OK, but all tools rejected the coding, what do you mean configuration? in my immo its show me config 210106220100 and in my ecu its show me (000000) so which digit numbers i must write manual in ecu dump?.

[Ulises]

Hi
Friend you need to use ODIS online better and fast process
[emoji1305]


Enviado desde mi iPhone utilizando Tapatalk

[Pyromaniak]

I once try turn off start stop and code have ben rejected, i change only one bit ( but its needed change two bits)

I think its posible only few codes to be write in, but its needed be a good one. So if you turn start stop off and remember another bit, code has ben rejected( or else setting associated with another setting)