Nissan Versa 2013

[Triniguy]

Hi mates,

need a bin file for an Nissan Versa 2013 model 93c66 eeprom. Original file got corrupted

Thanks in advance

[Triniguy]

Hi mates,

need a bin file for an Nissan Versa 2013 model 93c66 eeprom. Original file got corrupted

Thanks in advancePichttps://uploads.tapatalk-cdn.com/20190902/e61bcb7c6641460b1dc74c093a1bfe32.jpg

Sent from my SM-A600FN using Tapatalk

[jomberykaso]

I hope this file can help you.

Good Luck!

[Triniguy]

I hope this file can help you.

Good Luck!Unfortunately getting 0.0km and no gauge working. I wrote it 16bithttps://uploads.tapatalk-cdn.com/20190902/86a97fd84203ed31d56aa0d5f23bcdde.jpghttps://uploads.tapatalk-cdn.com/20190902/5cced63ef245f233a5a63006e9f138f1.jpg

Sent from my SM-A600FN using Tapatalk

[jomberykaso]

if mileage was to 0 km ....maybe eeprom is bad soldered.

did you sort this out?

[clusters]

Funny that his pic shows 217048, wonder where that came from. lol

[narkeleptk]

Maybe the original mileage before taking the dash out. I take pics a lot as notes myself..

[Triniguy]

Maybe the original mileage before taking the dash out. I take pics a lot as notes myself..You right

Sent from my SM-A600FN using Tapatalk

[Triniguy]

if mileage was to 0 km ....maybe eeprom is bad soldered.

did you sort this out?I did take off the eeprom and solder it back properly. Still showing 0km and no gauge working. I will take the panel again Wednesday and will report.
Jomberykaso I know you bin always good. May have to try another one or use new eeprom. Is an easy panel never had an issue before.
Thanks again for your support

Sent from my SM-A600FN using Tapatalk

[Triniguy]

here is the bad bin, may somebody can fix it. 217km,
problem is after I changed it to 71xxx it still showing 217xxx and the speedometer not moving, but when I read it the panel shows new mileage????
thanks in advance

[jomberykaso]

I know what was your mistake.

You changed mileage using standar Nissan Kansei algorithm, addresses 0060 and 0070.

However mileage is not there....mileage is in addresses 01A0 and 01B0

[jomberykaso]

Post original file. I can change mileage for you

[Triniguy]

I know what was your mistake.

You changed mileage using standar Nissan Kansei algorithm, addresses 0060 and 0070.

However mileage is not there....mileage is in addresses 01A0 and 01B0Thanks much

Sent from my SM-A600FN using Tapatalk

[Triniguy]

Post original file. I can change mileage for youI post it check the previous msg pls

Sent from my SM-A600FN using Tapatalk

[Triniguy]

here is the bad bin, may somebody can fix it. 217km,
problem is after I changed it to 71xxx it still showing 217xxx and the speedometer not moving, but when I read it the panel shows new mileage????
thanks in advanceThis is the original file after I changed it

Sent from my SM-A600FN using Tapatalk

[jomberykaso]

This is the original file after I changed it

Sent from my SM-A600FN using Tapatalk

file after you changed is not the original...it is file edited.

Post file before you changed mileage

[Triniguy]

Post original file. I can change mileage for youThe file I post before is the one I interfere with and spoiled it. That's all I have, sorry. What I did find out it is the Singapore model and it going up to only 180Km/h. Japan models going up to 220Km/h......

Sent from my SM-A600FN using Tapatalk

[Triniguy]

file after you changed is not the original...it is file edited.

Post file before you changed mileageThe cable of my original tool went bad and I used the DP3 clone, that's how all problem start with. So after I fixed my cable and used the orig. XTool the file was edited already. That's why I was asking for a new bin my friend.

Sent from my SM-A600FN using Tapatalk

[Triniguy]

file after you changed is not the original...it is file edited.

Post file before you changed mileageWill browse the chat and try some files until I successful lol

Sent from my SM-A600FN using Tapatalk

[jomberykaso]

see notifications inbox