Emulator on Simos PPD1.5 ???

[alldecode]

i have ECU Siemens VDO 03G906018FG Simos PPD1.5 with water inside, and car not start, and how to clone of make immo off this ECU?

Did someone try to make immo off with emulator Jolie or OF68, in manual for Jolie have PPD1.5?

Procedure to clone or apply to car, please share, i never worked, please share.

Regards

[rafal]

https://www.youtube.com/watch?v=lPgm-brFJ58

[alldecode]

i see, but did works?

this is solutions with Jolie, and OF68 emmu, are work?

[rafal]

i never tested but should work................

[alldecode]

ok, thx

i want to buy some tools to clone or read this ecu or like that, SMOK have.

[alldecode]

Jolie works, OF 68 no solutions for this ECU

[caliskan71]

I was tried julie emu on ppd 1.1 not work

[figani]

I have used julie many times on ppd1.5...
check actual manual installation on their website...
works like a charme...

[danielif]

Hi. Another option is;
http://manual.ecu-service.info/MULTI_CAN/MANUALS/PPD__1X.html
Regards.

[abdelkmel]

Hello
No need immo off just swap eprom from old to new ecu.
I do it yesterday with same ecu in passat b6
Working fine.

[figani]

Hello
No need immo off just swap eprom from old to new ecu.
I do it yesterday with same ecu in passat b6
Working fine.

if you change ecu, yes...
why not it´s simple...

if you have a dtc stored ecu blocked...
your solution is not usefull...

if you transfer eeprom from one ecu to another, the new will also be blocked...
while eeprom is swapped...

[alldecode]

i have ecu with immo problem, and Julie working, swapping ecu is another problem.

"figani" that's how I made it and it works

Regards

[figani]

I have used julie many times on ppd1.5...
check actual manual installation on their website...
works like a charme...


as I wrote before @alldecode, it works like a charme with julie...

[wowa557]

SQU068 work but with error massage in dash