HOW TO READ A CITROEN C4 PICASSO EDC16C34 WITH 95160 EEPROM?

[Panathaole]

Hi

i try to read on bench an ecu from Citroen picasso c4 edc16c34 WITH 95160 EEPROM,

KTAG haven't any option for edc16c34 and 95160 eeprom...

how i can read it?

Thank you....

648093 648094 648095


i desolder and read on bench the eeprom....

[figani]

I'm sure that it can read...
Check under protocols 60 or 66...
Its motorola mpc group...

[Panathaole]

Unfortunately only 95320 & 95640 at this protocol...

[t77]

Hi try read it by BDM100

[Panathaole]

Hi try read it by BDM100

Hi

I don't have it....

I have ktag & galletto 0475...

[drewdom]

Just try to read You will heave double or triple repeated same data from 95160 eeprom content in dump.

[Panathaole]

I already read eeprom in programmer....

I check tomorrow for what type of flash it have, to choose the proper protocol.....
(Independently from eeprom)

I need to get map, to remove dpf & ad blue...

Is this the right bdm adapter?

648173

648174

648177

[figani]

I already read eeprom in programmer....

I check tomorrow for what type of flash it have, to choose the proper protocol.....
(Independently from eeprom)

I need to get map, to remove dpf & ad blue...

Is this the right bdm adapter?

648173

648174

648177


yes, this is bdm mpc probe...
when you take a look under helps files...
you see connections, but also the right probe which to use...

hen you choose the right protocoll, with the the right mpc...
you will see it read also eeprom 100% even if the dump size not fit...
no problems....

[Panathaole]

Yes I see it at help files,I ask just to be sure....

Just one last question, I can see processor mpc562 but I can't see the ext flash, to choose the right one (is at the under side of the PCB and is hard to open) if I select a wrong protocol for this ecu is any chance to harm the ecu?

DPF remover work ok with this ecu?

Thank you....

[drewdom]

If you have fg tech try it it will do automaticly, with ktag it will tell you if protocol is wrong and tell you what nr of protocol you should chose.

[Panathaole]

I have galletto but I don't have bdm mpc probe for it, I have only for ktag, I didn't get the converter adapter for it...

Thank's

[figani]

Yes I see it at help files,I ask just to be sure....

Just one last question, I can see processor mpc562 but I can't see the ext flash, to choose the right one (is at the under side of the PCB and is hard to open) if I select a wrong protocol for this ecu is any chance to harm the ecu?

DPF remover work ok with this ecu?

Thank you....


you will get message, new window...
to change the protocol...
will be ok...

[Panathaole]

unfortunately no communication with ecu....

i think i am doing something wrong.... I have to add power to adapter? or only to ktag?

648410 648412



ok solved.... one of the F....ng cable has bad connection with adapter....

but i get only 2 files... flash and eeprom no micro.... why? no micro in that ecu?????