hipolitogt
5th September, 2019, 05:30 PM
I tried swiftec v1 and v2. with v1 car runs ok but gives me this errors:
2622 Temperature of DPF too low
2084 DPF Mass Air too low
attach ecu ID read with Kess by obd, is not full read, is partial read. I don't want to open ecu (will be broken) to make full bdm read. Need tested solution please. Car is very very far away.
HW:
SW: 1037398857
VIN nr.: WDB9067351S384671
SW ver.:
Spare: CR40-64x-70T5-906-135kW-40N-0AEF-02-IAS-003_DPF12_ME5
Engine:
HW Ver.:
SW upg.: P409/705
Many thanks to all!!!
2622 Temperature of DPF too low
2084 DPF Mass Air too low
attach ecu ID read with Kess by obd, is not full read, is partial read. I don't want to open ecu (will be broken) to make full bdm read. Need tested solution please. Car is very very far away.
HW:
SW: 1037398857
VIN nr.: WDB9067351S384671
SW ver.:
Spare: CR40-64x-70T5-906-135kW-40N-0AEF-02-IAS-003_DPF12_ME5
Engine:
HW Ver.:
SW upg.: P409/705
Many thanks to all!!!