KTM EXC 2015

[badyl00]

Hello. I read Pic16lf1828. Can someone modify EEprom ?
from:
247.6 hours
8717km
to:
160 h
5220km

and correct checksum.
Thanks

[pipina]

Hi, with what tool did you read pic? There are only two type of odo display in exc and both have different eeprom that yours (for what I know)
Make picture of odometer.

Regards

[badyl00]

My odo is version with ICP pins under the battery ( first photo). I have special programmer and dump is 100% correct ( i cut eeprom data contains only FF ).

In attachment full dump of my PIC16LF1828 (eeprom area from 1E000-1E1FF)

[badyl00]

I have some progress. I remove FF from dump and it looks good. There is two repeated 14 byte lines. Now someone can help to calculate checksum. I don't know how to do this.

649048

In attachment dump with removed FF (don't know why my programmer add this).

[pipina]

Hi, If cks is not ok, odo and operating hours will be on 0. On first start up of dash you can adjust km on desired but hours will remain 0. In attachment 2 readings if any milage master can help figure out complete solution.

Regards

[badyl00]

I saw in this thread:
https://www.digital-kaos.co.uk/forums/showthread.php/744273-Ktm-exc-2015
Friend @tech_cz have solution.

[badyl00]

Second read. Now same hours but km increased to 8718km.