2008 VW GTI MICRONAS CDC3217G + 24LC32

[mojomojo]

hello folks im working on 2008 VW GTI MICRONAS CDC3217G + 24LC32

tried programming thru obd2 with vvdi and failed.

ny question is can i put this micronas in service kode? to gain access thru obd

do i need to read micronas cdc3217g on bench

i only have vvdi prog for mcu reads

[MarkPRP]

boot pin, or service mode via eeprom..

Boot pin - check supervag pictures

[mojomojo]

boot pin, or service mode via eeprom..

Boot pin - check supervag pictures
i wasnt aware that we can put these micronas dash on service mode.
can someone edit me file? procedure after installing cluster back onve in service mode.

[mojomojo]

boot pin, or service mode via eeprom..

Boot pin - check supervag pictures



also does the boot pin method only work woth supervag? can vvdi2 be used? is there a 12v signal on that boot signal?

[mojomojo]

boot pin, or service mode via eeprom..

Boot pin - check supervag pictures



also does the boot pin method only work woth supervag? can vvdi2 be used? is there a 12v signal on that boot signal?

[Maartinj]

also does the boot pin method only work woth supervag? can vvdi2 be used? is there a 12v signal on that boot signal?
With VVDi too
but Booh pin is not for beginners.
I fixed maybe 10-15 cluster with chks error after boot pin metode
in a fact - you need open cluster, so better read epp and save it as backup

[mojomojo]

With VVDi too
but Booh pin is not for beginners.
I fixed maybe 10-15 cluster with chks error after boot pin metode
in a fact - you need open cluster, so better read epp and save it as backup

would you like to explain the method to me please. i will try depending how risky it looks.
but other than the boot mode method. i have save the epp what do i do next Martin? thanks

[Maartinj]

would you like to explain the method to me please. i will try depending how risky it looks.
but other than the boot mode method. i have save the epp what do i do next Martin? thanks

simple read epp , do service mode, write epp , and get access to cluster
from what i see ... this is the best way for you

[mojomojo]

what address line to I edit on this epp.

I always thought you cant put micronas and encrypted epp in serivxe mode. I thought these epp had to be isolated( meaning not sharing immo info with mcu)