Golf 6 keyless problem

[cosmynnec]

Hello,
I have an 2010 Golf 6 R with keyless system.
I tried to add a new key to the car using FVDI.

Now the car shows 0-2 on the dashboard and i cannot add the keys.

I tried adding only the original key and same problem , it shows 0-1 and "key not found"

Is there a special procedure to add the key different from a normal car without keyless ?

[mlodywafel]

When showz 2-0 put the key neaer coil on the standard place wher is ignition lock


Wysłane z iPhone za pomocą Tapatalk

[cosmynnec]

I tried that but it doesnt work.

[fred77]

strange - wonder if issue with car's key coil .
Try one of those coil testers which light up on signal - avdi sell one.

[cosmynnec]

The car worked perfectly before i tried to add the second key

[fred77]

Did you do backup of dash before hand?
If so restore it.

In theory it could be left without keys as needs to 1st see the key near coil to register.

[cosmynnec]

I did not do a backup because i didn't open the instruments.

[fred77]

You can do backup on all systems, even MQB systems, without opening dash. Indeed VVDI even pops up with a message saying "do backup"
FVDI is from fly - so recommend a decent tool like AVDI or VVDI, and bin Fly

Good luck

[comizelu]

Try go go in measuring blocks in immo.
Check if ignition coil is working by checking the key..

Sent from my MI MAX 3 using Tapatalk

[qeso705]

Avdi add support for keyless very late, fvdi probably just dont support it.

[cosmynnec]

I cannot measure blocks in immo, it's grayed out.

I measured the coil on pins 7 and 8 from the instrument cluster and it has a resistance of 86 ohm.

I noticed that if i press the Start button the led on the key blinks for 1-2 sec , than the "key not found" message appears

[qeso705]

You can do backup on all systems, even MQB systems, without opening dash. Indeed VVDI even pops up with a message saying "do backup"
FVDI is from fly - so recommend a decent tool like AVDI or VVDI, and bin Fly

Good luck

Avdi and decent is like night and day.

[pouleddy]

Hi, sure fvdi damage the immo data of dash, need repair the data manual & after you need vvdi2 to continue...

[Weasel3]

Avdi add support for keyless very late, fvdi probably just dont support it.

I think I remember this also. VVDI1 Old could do keyless, while AVDI didn't at that time. And this was some of the bulling, which was done earlier when it didn't.
So an un-updated FVDI 2014/2015? I am quite sure would not support this.

[Kocta]

Read pin-FVDI and then use ODIs to add the key.

[qeso705]

Kocta did you tried itself your solution? Pin isnt used since golf 6 was introduced. Only solution pass job to someone with proper tools or to buy proper tools. Now with 0/2 you need perform akl procedure to get data.

[cosmynnec]

I managed to do repair it with FVDI by putting the clusters in service mode , and adding the key from there.
I tried like 10 times before it worked. So I guess i was lucky ...
So from now on I won't be using FVDI for jobs like this.

[fred77]

Avdi and decent is like night and day.

Almost always use AVDI for VAG. VVDI seems to separate functions to make it more differcult.
This is my experience, and use whatever tool i'm comfortable with.
All tools let me down time to time.

Binned all Fly kit - it's rubbish which isn't for professionals.