Fiat Tipo ME17.3.0 virgin

[DiReCtX]

Hello
Did anyone manage to virgin this ecu ??
I suppose the code is in four places starting with C2FC0100... at
0xC600
0xC680
0xC800
0xC880
Can anyone confirm that the location is correct ??
Regards

[rego88]

hello, solve for virgin?? i have same problem for one ecu abarth.....

[vladimir88]

good work man

[vladimir88]

you need cable kkl

[rego88]

hello..... where is virgin dump for write?? i view only program

[DiReCtX]

hello..... where is virgin dump for write?? i view only program

You need use program from vladimir88 and kkl cable to read eeprom from ecu and virgin them. (https://www.digital-kaos.co.uk/forums/member.php/675102-vladimir88)

[rego88]

You need use program from vladimir88 and kkl cable to read eeprom from ecu and virgin them.

i view all, but the program not in english and the pc don t support a lenguage, i don t understand..... i have kkl cable, adapter, and all.... i try..... arrive 100% and write an script.... but is impossible read..... i try into a car and not start.....

[DiReCtX]

@vladimir88 you can suggest or provide some instructions on how to do this program virgin, because the program is in Russian and it's hard to confess with it, this program can do me17.3.0 ??
Thanks in advance
Regards :beer:

[Necto]

Great! Thank you very much!

[Necto]

Can`t download files. How many posts I must send ?

[Necto]

Upper knob is "Flash", than "Clean" and choose port

[vladimir88]

https://www.multiecuscan.net/ReleaseHistory.aspx

[vladimir88]

ktm bench red write this ecu not need open

[DiReCtX]

Hi
iskcode is in block C2FC01, I have virgin state this block and all d-flash from new ecu me17.3.0 from "factory", now I must test used ecu.
Regards

[doutlaw]

Hi
iskcode is in block C2FC01, I have virgin state this block and all d-flash from new ecu me17.3.0 from "factory", now I must test used ecu.
Regards

DiReCtX did you manage to verginize ecu through manually modify the lines in your first post?

[amper]

Me17Flasher+ cleaning eeprom = virus win32:SaliCode

[DiReCtX]

DiReCtX did you manage to verginize ecu through manually modify the lines in your first post?
Hi
as soon as I have a car on my "square" with such ecu I will do tests with manual virgin line + crc eeprom of me17.3.0
I will write about the results
Regards

[doutlaw]

Hi
as soon as I have a car on my "square" with such ecu I will do tests with manual virgin line + crc eeprom of me17.3.0
I will write about the results
Regards

Vladimir software isn't running properly on my pc, as that looks an easy way to do it. I also got the KKL cable.

I got one at the workshop. Actually its a few blocks away. I can provide you with a file to find a solution together.
File attached is the original data from eeprom read with Ktag.

[doutlaw]

Comparing this file to another I have and yours I can see the eeprom data is diveded into 2 sections. on this particular one the data is on the 1st section while on your file the data is on the 2nd. Hence immo info is in the same location yet different address.

[tinerfe30]

Hi mate.
I can´t download the software.
Can you put new link? Pleace.
I need virginize a ECU ME17.3.0 And I no found solution.
Thank for advance.

[slowmosquito]

Hi
as soon as I have a car on my "square" with such ecu I will do tests with manual virgin line + crc eeprom of me17.3.0
I will write about the results
Regards

Hello,

if you explain how to set virgin the "square" dump i will test in this week, i have to switch ecu with used ECU in 2 Abarth car.
Here you are the dump that i must set virgin and put in used ECU.
Best Regards