Golf 5 2007. Cannot read CS and pin ? Lockout ??

[sdnatlst]

I made blade turn on ign and tried vvdi2

It says security access time not waited


So i try fvdi it says waiting 10mins security access then fails

Attached photo. Any idea


It is immo 4 cdc24c32

[robinbga]

I made blade turn on ign and tried vvdi2

It says security access time not waited


So i try fvdi it says waiting 10mins security access then fails

Attached photo. Any idea


It is immo 4 cdc24c32Hi, you need to switch on the ignition on n leave it on for 30 minutes so that the counter resets.
That should solve the problem.

Cheers
Robin B


Kess V2 . K-Tag
MiniPro . UPA . VVDI2

[sdnatlst]

Thanks! How do you know it's 30mins.
Do you know why this happened I've never seen it before

[ghostrider72]

Thanks! How do you know it's 30mins.
Do you know why this happened I've never seen it before

Measuring blocks

[sdnatlst]

Tried. Nothing showed in any measuring block regarding wait timers like I normally see on immo 3 systems.
In either instrument or engine ecu

[robinbga]

Thanks! How do you know it's 30mins.
Do you know why this happened I've never seen it beforeI actually don't.
But I have waited that long before that is how guessed...
[emoji23][emoji1787]

Kess V2 . K-Tag
MiniPro . UPA . VVDI2

[dtip]

try older vag version - 18

[ghostrider72]

Why dont you just take the clister out and do it on the bench mate. 10min job

[sdnatlst]

I was told if ecu locked out. And I took cluster and read eeprom.

When I put back in for key learn it still won't learn if ecu locked.

I don't have tango to add direct? Only vvdi 2 vvdi prog etc

[super jumbe]

Is this AKL

[sdnatlst]

Yes sorry should of said.

AKL

Left customer with blade.
He left ign on for several hours today. So tomorrow morning I return and try one more time

[super jumbe]

Looking at your first image your ECU is responding and you first need to read cs to make dealer key, let us know tomorrow what ever.

[sdnatlst]

I click auto detect cs. It fails with security error , wait time not done

So cannot even get data or pin to make dealer key...

[fred77]

take dash out - Golf after 2005

[sdnatlst]

Dash out - vvdi prog clip to read eeprom

What is next step with the tools I have available below? Please

[ghostrider72]

Cluster out. Read eeprom with Prog. Load that eeprom to vvdi2 and click on SERVICE MODE. Upload generated eeprom to the cluster with Prog. Connect cluster back to car. Write original eeprom with vvdi2 via OBD. Now you can access all immo data in cluster. Enjoy [emoji6]

[qeso705]

Remember to save first abs coding.

[sdnatlst]

Thanks lads

[ghostrider72]

Remember to save first abs coding.

Good idea but shouldn’t have any problem with it if you fitting same cluster. Also its MK5 so not relevant in short coding