Citroen Berlingo 2007 remote programming

[super jumbe]

Any one got an idea how to programme 2007 Berlingo new remote fob tried every tricks no joy any one.

[Manta1600]

This is automatic programming when you switch ignition on

If you cant program the remote means that your remote is wrong

Try ASK 0523 PCF7941 or ASK 0536 PCF7961

both will start the car but with only one will work the remote

[super jumbe]

652368

This sort as the picture with seperate Chip T14 ID46
Berlingo Remote Head 02-08
Citroen Berlingo M59B Models
Genuine Part Number: 6554RH
Citroen Remote with T14 ID46 Transponder Chip.
PCF7936

[rob h]

I have encounter some off these, even with central locking installed.
In the bsi the remote function i not always activated.
Check it, using lexia,

[Manta1600]

Sorry my mistake I thinked about new shape

[super jumbe]

Car is coming on Monday and I wonder this instruction is any good.

CITROEN Berlingo
(earlier models with remote key fob)

1. Separate the key fob from the standard key.
2. Insert the key into the ignition switch and turn it to position I (accessory position).
3. Hold the remote fob towards the receptor at the front of the vehicle.
4. Press the large button on the remote, followed by the small button.
5. Repeat the procedure for a second remote at this stage (if applicable).
6. Turn the ignition off.
7. After approximately five seconds, the remote(s) should function correctly.

[newone]

for those i use kd PSA CIR48 Berlingo,programming with sbb,after chip programming it ask for remote adapt,everything works ok

[super jumbe]

Does it have to be SBB!

[ghostrider72]

Lexia do that as well

[dedz]

You need to go in 206 mux on pp2000 and change

Envoyé de mon SM-G965F en utilisant Tapatalk

[smirnoff_rules]

have the same with my work van , diagbox shows a remote key and have pincode but tried 3 keys and remote will not work ,

[super jumbe]

have the same with my work van , diagbox shows a remote key and have pincode but tried 3 keys and remote will not work ,

I believe you smirnoff because 3 days a go I tried with diagbox and didn’t work, tried lonsdor, x100pro, MV clone the remote just don’t work mind you an old van 2007 not worth spending any more time on it.

[brend]

If key have pcf emul ,this key type all in one and remote work with this cat only after programming and sunhro away.
If you programm this key ,remote work only in this car.


For this trable.......
1.Or new key
2.Or renew (virgin) key and programm this agane.



Any one got an idea how to programme 2007 Berlingo new remote fob tried every tricks no joy any one.