PDA

View Full Version : BMW e91 edc17cp02 need help



Majster007
21st September, 2019, 11:17 AM
Hello
i Have problem with bmw e91.
the car is from 2008.Iread from kess by obd. I turned off EGR, winols calculated the checksums and i write file by obd.
the file uploaded correctly,but car wont start.
here the problem began.
It turned out that the car had previously changed ecu. ECU is from the end of 2009. NR ecu 0281016106 DDE8506434.
whereas when i read by k-tag the software inside the ECU it 1037509478 HW:08512498.
They are not the number that should be in this ecu.
car worked well despite the combination with strange softwares
I have a backup from kess and ktag, but after write by obd the wrong file.in the attachment 5 files.

can anything else be done about it?

ps.sorry for my English

plam1972
21st September, 2019, 12:24 PM
try this pass pm

macako6
21st September, 2019, 12:26 PM
With which file the vehicle starts ?

a500tut
21st September, 2019, 12:33 PM
This ecu write only in boot mode, not obd.

Majster007
21st September, 2019, 02:41 PM
With which file the vehicle starts ? now car wont start

Summa
21st September, 2019, 09:21 PM
Hi.

Write with Ktag the attached file , the car will start.

Pass in PM

Majster007
22nd September, 2019, 12:29 PM
Hi.

Write with Ktag the attached file , the car will start.

Pass in PM
I write this file. Car wont start, immo fault

Majster007
22nd September, 2019, 12:42 PM
Immo in this ECU is in eeprom or Micro? Why immo bloks start engine

a500tut
22nd September, 2019, 02:09 PM
Micro :)

Summa
22nd September, 2019, 07:54 PM
I write this file. Car wont start, immo fault

See this one , same pass .

Majster007
23rd September, 2019, 09:59 AM
car started.
you saved my day.
thanks

rimljan
23rd September, 2019, 11:02 AM
Hi Summa need immo off please here
https://www.digital-kaos.co.uk/forums/showthread.php/773433-Bmw-EDC17CP02-E87?p=3674918#post3674918