zenec ze-nc2040 code

[attilaa0]

Hi !I need code for this unit ,i try 0000 ,1234 not work.It ask code 4 digits ,maybe somebody can tell supercode and method for input.it have24c16.
Thanks!

[shooting]

Hi !I need code for this unit ,i try 0000 ,1234 not work.It ask code 4 digits ,maybe somebody can tell supercode and method for input.it have24c16.
Thanks!


I think code is in flash not eeprom, but one solution is to fill eeprom with all "FF" then it shouldn't ask for a code

wbr

[jamienatorr]

HI!
Does anyone know how it is with this model?

[srgean832]

code 012345

[cubica1]

Hi friends,

ZENEC ZE-NC2040, need code from fls. I've tried master code 0000 or 1234 w/o succes, also tried FF FF FF into eeprom 24c16, w/o succes...still asking for code on the same manner :)
So, can somebody calculate 4 digits from fls spansion S29AL016Jxx02 ??
Plc, find attached file,
thanks in advance,
regards,
cuby:encouragement:

[cubica1]

aaarrgghhh....SOLVED ....!!!

I have seen on the net, some of guys solved but never answer how? I do not know why?
here is solution and explanation for all ...somebody will need in the future....

This NAVi is normally delivered w/o code, but if customer activate anti-theft option, navi get 4 digits code!

There is dialogue ''ENTER CODE'' with four digits,

But, there is another one dialogue ''ENTER SUPER CODE '' !!! You can reach it by holding two buttons SRC+MUTE (MUTE is actually PWR button). Super code needs 6 digits !!!

Than simple enter 123456 and voila.... anti-theft is deactivated !!!
After that, hold SRC, go to SETUP, go to MISC and activate ''load factory''
NAVI will not ask for code.
regards,

cuby