Citroen C4 picasso airbag light on

[fuzz1]

Hi

Can anyone help me?

I have a citroen C4 picasso 2018. The airbag ecu was changed and replaced by a new one after an accident. The driver airbag did not come out in the accident. The two seat belts were locked.
After replacing the seatbelts and the airbag modules the following errors still comes on.

Can any one help?

B1401 Steering type configuration fault
U1F00 Fault not recorded in the BSI faults log

[allseven]

Are you using Launch? B1401 may actually be driver's airbag open circuit. Refer to this thread for B1401: https://www.digital-kaos.co.uk/forums/showthread.php/757615-I-need-help-with-citroen-srs

[fuzz1]

Are you using Launch? B1401 may actually be driver's airbag open circuit. Refer to this thread for B1401: https://www.digital-kaos.co.uk/forums/showthread.php/757615-I-need-help-with-citroen-srs

Yes I'm using a launch. I can't figure out what's wrong. Can anybody help?

[fuzz1]

Fault was due to the fact that the ecu was wrongly configured. LHD was used instead of rhd.

[fuzz1]

The fault was due to the wrong configuration of the ECU. LHD was used instead of right hand drive