Problem with Visteon DCU102 Peugeot Boxer3 2.2HDI

[HLAVICKA11]

Hi guys,
I have a problem with ECU Visteon DCU102 9661256980. There is no DTC after EGROFF. Even if I disconnect any part of the engine. Did someone solve this problem?
Thanks

[mario38]

the egr file off is not done professionally .. all dtc present in ecu have been deleted .. this explains the motion you don't have any dtc if you unplug the plug .. if you want a suggestion write the original file or run egr off in proper way ...

[HLAVICKA11]

the egr file off is not done professionally .. all dtc present in ecu have been deleted .. this explains the motion you don't have any dtc if you unplug the plug .. if you want a suggestion write the original file or run egr off in proper way ...

Mario

please try

[mario38]

Mario

please try
yes your problem is the egr file off all the dtc are off ..
if you write original, everything works ..

[tunelab]

yes your problem is the egr file off all the dtc are off ..
if you write original, everything works ..
without checking the file and know about what are you talking about no since
can you tell me in the file which dtc table is complete off ...........?
there is only egr and egr dtc off nothing else
and please can you help us to post a professional egr off solution for this ecu ?

[waldi1979]

.. all dtc present in ecu have been deleted ..

Here (https://www.digital-kaos.co.uk/forums/showthread.php/573936-Ford-PSA-DCU102-EGR-off?highlight=dcu102) you will find out why...

[HLAVICKA11]

yes your problem is the egr file off all the dtc are off ..
if you write original, everything works ..


yes with the original file everything works