Help needed pcode and remove MAP sensor from file audi a3 2009 1.8tfsi PLEASE

[alextinou]

hi guys need help with my 1.8tfsi 2009 manual audi a3

I have been having trouble with my MAP sensor the car requests boost but the MAP sensor actual is stuck at 10. I have tried 2 other new sensors original and have checked wiring.

Error code is get is: P0237 - Turbocharger boost sensor A Low input. It changed to high input if i unplug the map sensor.

Can someone delete the pCODE P0237 from my file please. Also if possible to delete the MAP sensor completely off the ECU please

Will be a great great help

[robinbga]

Update it to a 3bar.

Cheers
Robin B

Kess V2 . K-Tag
MiniPro . UPA . VVDI2

[icezero2010]

Update it to a 3bar.

Cheers
Robin B

Kess V2 . K-Tag
MiniPro . UPA . VVDI2

check fuses and make first ori file on it ;-)

[alextinou]

All fuses checked and also original map has been put on it. Still the same :(

Could you help me delete pcode or take it off the map file please

[alextinou]

Hi Robin. That won't help. There's a fault somewhere need the pcode mapped off and the map sensor off the ECU file

[icezero2010]

All fuses checked and also original map has been put on it. Still the same :(

Could you help me delete pcode or take it off the map file please


u cant do it u need it :-)

or will u next step to delete fuel injectors to safe fuel :-D

[robinbga]

All fuses checked and also original map has been put on it. Still the same :(

Could you help me delete pcode or take it off the map file pleaseTalk to a friend he could help u.

Skype: eduard280196

Cheers
Robin B



Kess V2 . K-Tag
MiniPro . UPA . VVDI2

[gas43]

put again the oem sensor. the difference 3 bar and oem is only in eyes....:chuncky: ...dont realy need 3 bar.
for 3 bar sensor need remap it.
most likely broken wires near sensor...(maybe and on the engine loom).
Also check for boost leaks..