Need fix cluster w203

[motorsport]

Hello Is possible fix w203 my tool get problem supply when programming km and flash cluster now dash is dark does need flash or just éeprom can be fix the problem
Thanks for any help

[brend]

..........................

[motorsport]

Explane more,how exactly and which tool,which away?

When write or very file mode programing with original digiprog
Was not near tool now when i try conect i have unknow version

[brend]

Red eeprom and load dump.

[motorsport]

Red eeprom and load dump.

Ok i Will post When car back thanks

[motorsport]

Red eeprom and load dump.

Here is dump From 93C86
Thanks a lot

[jomberykaso]

Dont forget to program ezs or display will flash.

Good Luck!

[motorsport]

Dont forget to program ezs or display will flash.

Good Luck!

Thanks but no work display flash and dark

[jomberykaso]

my file is good.... you have to upload file from ezs to be edited also or your dash will not work

[motorsport]

my file is good.... you have to upload file from ezs to be edited also or your dash will not work

And if I flash in éeprom
By 08 08 now have just test plug with tool for see if illuminate

[jomberykaso]

......................
655628

Read ezs and upload your file here

[motorsport]

And if I flash in éeprom
By 08 08 now have just test plug with tool for see if illuminate
Is same with flash just test it flash It illuminate empty screen then dark display

[jomberykaso]

Post ezs mate...............:pcguru:

655631

[motorsport]

Post ezs mate...............:pcguru:

655631

Ok will try Tomorow but can you explain me what will help you for fix it maybe is problem flash ? Need edit ezs too Strange ?

[bender]

Hello Is possible fix w203 my tool get problem supply when programming km and flash cluster now dash is dark does need flash or just éeprom can be fix the problem
Thanks for any help

sorry I am not quite understand you. but let me quess by saying you try to programme cluster through obd & cluster goes
dark? & the vehicle starts ok? if so maybe disconnecting the battery for awhile then reconnect will wake the cluster.

[motorsport]

sorry I am not quite understand you. but let me quess by saying you try to programme cluster through obd & cluster goes
dark? & the vehicle starts ok? if so maybe disconnecting the battery for awhile then reconnect will wake the cluster.

No When programm cluster by plug my tool get problem power supply. Tool go off and on switch when programming so progaming was stoping

[monir99]

Hello:2in1:

[raf0468]

power up your dash on bench and see if cluster illuminates..if all is good screen will light up..