Peugeot 207 no crank

[victoralexe]

Hello all,

i have a 207 Peugeot 1.4 gasoline

with 9528, f015 and 7173 error and no crank, have ur any ideea about that? bsi fault? lost sincro, i have verified relay's and fuses, all ok, batery lamp flashes when put the key in ignition key, the imoo i think work corectly because i have write new key wth pin extracted from ecu but same result - no crack.

thanks for any ideea about this fault.
Also central lock wont work


with regards
Victor Alexe

[brend]

Read better rules!!
https://www.digital-kaos.co.uk/forums/showthread.php/2-FORUM-RULES
24.

[patres]

Immo on 207 not blocking starter. If your engine no crank check 20A fuse in BSM. Starter coil have own 20A fuse.

[victoralexe]

But i have f015 - no ecu communication is related with fuse of 20A? Central lock also not work
I have verified all fose on fuse box (bsm) and all is ok. maybe is missing a ground on ecu or motor, i will check again tomorow

thanks a lot

[patres]

When you cant connect to engine ecu with diag, unplug this ecu end check power suply, ground and CAN line on ecu connectors. If u need pinout, write ecu number.

[victoralexe]

Dear sir,
I have received this 3 errors 9528, f015 and 7173
with diag
9528 refer to no posibile to cranck
F015 no ecu comunication
7173 oil temp sensor fail

9528 i will resolve tomorow - i think

the ecu is VALEO J34P SW9664127180

thanks a lot

[patres]

check your power suply and comm - here is pinout
656589
656590
Pin F4 is ground command to main power suply relay to engine ECU

[victoralexe]

Resolved,
No power to Ecu. I have put a cable from batery with fuse of 15 A and start imediatly.

Thanks a lot