PDA

View Full Version : Mercedes ECU Delphi mileage correction please.



labik
4th October, 2019, 01:23 PM
I have mercedes w212 - ECU delphi 3.10 with oryginal mileage 269888 km.
In Dash and EZS km is 26988.
After command "Teach-in process after replacment of component "diesel particitulate filter"" mileage in ECU is +200.000 km and shows 469888 km.
Please correction to 269888.

labik
5th October, 2019, 09:33 AM
Nobody nothing ?

Cllau
5th October, 2019, 08:40 PM
with 0 thanks from 2010 you will get 0 help....:pish::rulez::wink:

36. DK is a sharing community ,which means we all give a bit and take a bit.Any serial freeloaders/leeches will be removed from the site.

labik
5th October, 2019, 10:07 PM
with 0 thanks from 2010 you will get 0 help....:pish::rulez::wink:

36. DK is a sharing community ,which means we all give a bit and take a bit.Any serial freeloaders/leeches will be removed from the site.

Forgive yourself.
I don't give artificial thanks like others. You don't want to help, don't help.

nikka
6th October, 2019, 11:57 AM
Hi.Try this. Pass pm

Cllau
6th October, 2019, 12:11 PM
Forgive yourself.
I don't give artificial thanks like others. You don't want to help, don't help.

apart of artificial thanks, where is your contribution on DK helping others..:questionmark::questionmark:

jomberykaso
6th October, 2019, 04:20 PM
Forgive yourself.
I don't give artificial thanks like others. You don't want to help, don't help.

If you don't give artificial THANKS, we dont give you artificial HELP...simple

labik
6th October, 2019, 04:52 PM
Hi.Try this. Pass pm
After writing this file in DPF on the table show 0 km.
Unfortunately "Fill level of DPF" is 400%
Afrer command "Teach-in process after replacment of component "diesel particitulate filter"" mileage in ECU back to 469888 km. Without connect ECU to the car !!!
So somewhere else is saved mileage in ECU !

jomberykaso
6th October, 2019, 04:57 PM
80 2B 07 = 469.888 kms
7E 2B 07 = 469.886 kms

40 1E 04 = 269.888 kms

labik
6th October, 2019, 05:46 PM
OK. I found 6 records. I`ll check in a moment

labik
6th October, 2019, 07:51 PM
Still the same problem. I changed 6 records 40 1E 04 and first connect - show 0 km and 400 % - Afrer command "Teach-in process after replacment of component "diesel particitulate filter"" mileage in ECU back to 469888 km.

ECU not connected to the car.

labik
18th October, 2019, 02:56 PM
I back from holyday.
I act with the ECU.
Eeprom writing to other ECU and in the ECU show mileage 469888 km.
Eeprom from second ECU writing to the first ECU and show mileage form second ECU.

My conclusion.
Mileage is saved more than 6 records.
There is also a stored somewhere counter Total regeneration of DPF - in foto - value 40, and Main odometer reading - value 99998 km.
This values they move on from eeprom for other ECU.

Who will correct this eeprom correctly?