PDA

View Full Version : Can clone KTAG V7.020 or KESS V5.017 read/write Delphi CRD3PLUS.A0?



bokilee
5th October, 2019, 05:08 PM
Hi, I need information if clone KTAG V7.020 or KESS V5.017 can read/write Mercedes W205 С220 with ECU Delphi CRD3PLUS.A0?

Thanks,
bokilee

teerak2uk
5th October, 2019, 05:35 PM
Kess will if clone is stable & good quality also have battery support on the vehicle and I had hazard lights and seat belt engaged to reduce car going to sleep

Myjector
7th October, 2019, 12:37 PM
This version needs to be patched first in bootloader with Original tools before you can read and write in OBD

figani
7th October, 2019, 01:47 PM
This version needs to be patched first in bootloader with Original tools before you can read and write in OBD


can you post which tool/Sw/protocoll you used for patch...?
canīt find it...
THANKS...

Myjector
7th October, 2019, 02:07 PM
can you post which tool/Sw/protocoll you used for patch...?
canīt find it...
THANKS...

CMD bootloader for patch and full backup. Then you can read and write this ecu in OBD, only this version of CRD3X.A0

You can do all other versions in bootloader with all ori tools, but you can try if Ktag clone works on these

teerak2uk
7th October, 2019, 02:52 PM
Hi, I need information if clone KTAG V7.020 or KESS V5.017 can read/write Mercedes W205 С220 with ECU Delphi CRD3PLUS.A0?

Thanks,
bokileePost id from kess

bokilee
7th October, 2019, 03:29 PM
Hi, I'm waiting KESS to arrive. I will post ID from KESS when arrived.

Best regards,
bokilee

bokilee
5th November, 2019, 01:27 PM
Hi, kess arrived. I read it without problem about 1 hour and 30 minutes, and for writing also same time. I did not open the ECU and I did not pach ECU.

Thanks,
bokilee

b4mz3
22nd December, 2023, 11:57 AM
What kess did you use to do this? I have this ecu in my new car and i was goint to test the Bitbox/tatrix openport 2.0 solution via obd on this car.

bokilee
22nd December, 2023, 04:48 PM
Hi, this is the kess that I used with Ksuite253:

b4mz3
22nd December, 2023, 10:43 PM
Same as i have then, got the red pcb one. But i did this ecu with Bitbox FID214 with china Tactrix Openport2 today without problems via OBD. Waiting on the original Tactrix Openport 2.0 as it costs near nothing new.