Audi a6 airbag 4b0 959 655 G HELP!

[xispas]

Hi ppl. ive repaired 4b0 959 655 G from Audi A6 but it its with error 65535(Internal control module memory error) and now i need a dump file of an original airbag module to test it. Can anyone help me it that?

[yasser]

Upload your first file from air controler

Regards
Yasser

[totalfree]

Hi.
Try this.

[xispas]

Upload your first file from air controler

Regards
Yasser

thanks for the reply yasser here is the original file from my airbag

Regards

[xispas]

Hi.
Try this.

Thanks totalfree. I have not tried already but i?ve compared with my original file and there really are diferences. So i?ll have to test how it worked

Regards

[ivoo]

Here is repaired dump.
Try and send result.
Ivoo

[xispas]

Here is repaired dump.
Try and send result.
Ivoo

Thanks again. So what can I will test your file and that was posted by totalfree. When I have the test results I notice.
My fear is that a capacitor was damaged and two burned resistors not know if it will interfere

[xispas]

Here is repaired dump.
Try and send result.
Ivoo

ivoo, worked perfectly, after inserting your file I could delete the error. was perfect. thank you very much. where you come from?

[Zippy_gg]

I am having that same issue with my 2000 A6 2.7t and my car will be due for a smog check in a month, so I would like to get this resolved.
Can you share the process of clearing the error code?
What equipment do I need in addition to the Vag-com?
Thank you!

[alldecode]

This is Bosch Airbag and I work with Gopel software, and working over OBD conector with KKL interface.

[Zippy_gg]

My issue is:
Address 15: Airbags Labels: 4B0-959-655-AI8.lbl
Part No: 4B0 959 655 H
Component: Airbag Front+Seite 1002
Coding: 00106
Shop #: WSC 02324
2 Faults Found:
65535 - Internal Control Module Memory Error
00-10 - - - Intermittent

I have a Vag-com HEX+CAN Series.
I browsed the Gopel software site but did not see my specific Bosch module listed, close but no cigar.
Any suggestion as to how to proceed with resetting the error code?
Thank you!

[leloup2]

thanks you i will test

[Dudi_1981]

Hello , any body has Gopel software without virus ?

[berlands]

Hi ppl. ive repaired 4b0 959 655 G from Audi A6 but it its with error 65535(Internal control module memory error) and now i need a dump file of an original airbag module to test it. Can anyone help me it that?

Hello,

I have the same problem with my airbag controller.
Can you tell what you did to repair the controller?
Was it some capacitor that was broken?

Regards,
Berlands