PDA

View Full Version : Map Check 335D E92



AudiA53xxx
11th October, 2019, 01:09 PM
Hello Friends,

I have a 335D E92 with Tune, Agr and DPF Off but every time when I am full throttle and reaching 220 Km/h the car is going in to limp mode, than I musst switch the ignition off and on and everything is ok.

Can somebody check my File plese


https://mega.nz/#F!lFNljSbT!w44v1cYlBvczoRu0XRwwQw

This is The Link for the File and SW Info.

Thank you very much!

a500tut
11th October, 2019, 01:26 PM
Hello Friends,

I have a 335D E92 with Tune, Agr and DPF Off but every time when I am full throttle and reaching 220 Km/h the car is going in to limp mode, than I musst switch the ignition off and on and everything is ok.

Can somebody check my File plese


https://mega.nz/#F!lFNljSbT!w44v1cYlBvczoRu0XRwwQw

This is The Link for the File and SW Info.

Thank you very much!

If this solution does not solve your problem, then you will need to completely make a new file.

naskochipa
11th October, 2019, 01:40 PM
Hello Friends,

I have a 335D E92 with Tune, Agr and DPF Off but every time when I am full throttle and reaching 220 Km/h the car is going in to limp mode, than I musst switch the ignition off and on and everything is ok.

Can somebody check my File plese


https://mega.nz/#F!lFNljSbT!w44v1cYlBvczoRu0XRwwQw

This is The Link for the File and SW Info.

Thank you very much!pass- pm :)

msmotorsport
11th October, 2019, 02:56 PM
Here you go, stage 2 file 385hp 800nm dyno tested.
Allot of tuners dont know how to tune these good so watch out with the file you test
With r90 and 50d rail sensor 420hp 1000nm possible.

Pass in pm

AudiA53xxx
11th October, 2019, 03:26 PM
Here you go, stage 2 file 385hp 800nm dyno tested.
Allot of tuners dont know how to tune these good so watch out with the file you test
With r90 and 50d rail sensor 420hp 1000nm possible.

Pass in pm

Hey mate this donīt match with my Orig file Railpresure and other Maps dont match

This is my Orig File maybe this will Help

https://mega.nz/#!8McnAISC!qmUgurYUUlmhfM4e0XaXq6c3MHutWO7UioD-IAhzJdY

Thanks

msmotorsport
11th October, 2019, 04:11 PM
Hey mate this donīt match with my Orig file Railpresure and other Maps dont match

This is my Orig File maybe this will Help

https://mega.nz/#!8McnAISC!qmUgurYUUlmhfM4e0XaXq6c3MHutWO7UioD-IAhzJdY

Thanks

It matches mate, rail pressure maps are all the same thats why it looks like it doesnt match.
Write the file, everything will be okay

Ignasvw
11th October, 2019, 04:14 PM
Nice tuners. Guy say he get limp mod,everyone fix problems, but no one ask what faults he have .... LOL

rfernandes
11th October, 2019, 04:15 PM
Here you go, stage 2 file 385hp 800nm dyno tested.
Allot of tuners dont know how to tune these good so watch out with the file you test
With r90 and 50d rail sensor 420hp 1000nm possible.

Pass in pm
more than 800nm you need to upgrade your gearbox

AudiA53xxx
11th October, 2019, 04:17 PM
Nice tuners. Guy say he get limp mod,everyone fix problems, but no one ask what faults he have .... LOL

Dere ist no engine light or something like that, just when I read with Inpa it says error 428B


Gesendet von iPhone mit Tapatalk

AudiA53xxx
11th October, 2019, 04:18 PM
It matches mate, rail pressure maps are all the same thats why it looks like it doesnt match.
Write the file, everything will be okay

Is it AGR and DPF OFF?


Gesendet von iPhone mit Tapatalk

msmotorsport
11th October, 2019, 04:20 PM
Nice tuners. Guy say he get limp mod,everyone fix problems, but no one ask what faults he have .... LOL

This problem happens allot with coffetuners files, bad tuning of turbo maps. Wastegate not adjusted for the more air so turbo starts to overboost.
Wastegate in my file is adjusted to open more to control overboost .

msmotorsport
11th October, 2019, 04:21 PM
more than 800nm you need to upgrade your gearbox

No its not, these 6hp28 handle 1000nm without problem. i have done many with r90, 50d rail and turbosystem ballbearing hybrid running over 1000nm and +460hp

msmotorsport
11th October, 2019, 04:22 PM
Is it AGR and DPF OFF?


Gesendet von iPhone mit Tapatalk

Yes, empty your message folder

AudiA53xxx
11th October, 2019, 04:31 PM
Yes, empty your message folder

Ok, I did empty it but didn‘t get any message.

I‘ll try the file as soon as possible and will report if its working mate


Gesendet von iPhone mit Tapatalk

AudiA53xxx
17th October, 2019, 02:57 AM
Here you go, stage 2 file 385hp 800nm dyno tested.
Allot of tuners dont know how to tune these good so watch out with the file you test
With r90 and 50d rail sensor 420hp 1000nm possible.

Pass in pm

Thank you very much for this File mate [emoji1360][emoji1360] no limp mode and very powerful [emoji1377]


Gesendet von iPhone mit Tapatalk

Jeanphil
24th December, 2020, 11:24 AM
HELLO

i have a similar problem with my stage 2 remap, car begin to blue smoke on idle return and truck noise (similar to egr problem).. but no limp mode, i think it's a dpf egr bad desactivation.. always when a i drive 100km and car become hot, original file do nothing it's perfect, and ori dpf egr off the same it's perfect..
Can someone help me to achieve a real stage 2 DPF EGR OFF ?
Read complete by obd with kess v2

my car is a 335d 2007 e92 with edc16c35

HW: 0281013854
SW: 1037383837