hi need to fix my files please EDC17CP14

[Fabiomg89]

its a audi a6 2010 2.7 tdi canc 140kw sw: 1037529241 SW upg.: 4F7910401L 0110 Read with ktag
please check and fix all files. car wont start, no diagnostic, no ID with kess, fan on full blast
apreciated many thanks

[Fabiomg89]

please help :crushed:

[figani]

Did someone remap SW before...?
Dpf / egr / flaps / stage...?

Maybe your HW is damaged...

[tothzsolt]

Fabiomg89 (https://www.digital-kaos.co.uk/forums/member.php/677340-Fabiomg89)

Hello i can help you with more stuff, first i'm calculating you chk from flash try typing back and see if it starts the car if not then i have solutions digging out immo off al to later. nuber

big thnx.........

[ECU]
VIN=WAUZZZ4F1AN058328
IMMO ID=
CS=B8 8F 04 12 BC EC 90
MAC=F2 5A BF 2F
Config=64 E6 02
PIN=59342
Immo Type=IMMO 4
Immo Status=Not Learned

[Fabiomg89]

thanks i am going to try it right now. i will post the result

[Fabiomg89]

Did someone remap SW before...?
Dpf / egr / flaps / stage...?

Maybe your HW is damaged...

i flashed it via obd. dum move. now i know that boot mode is the good way. thats how it came to this. i saw in other thread that is possible eeprom file is bad.

[Fabiomg89]

still same thing no start tothzsolt

[tothzsolt]

send immo off eeprom and write car star ok
write winols my flash file and immo off eeprom to car
test and report
pass to pm

[Fabiomg89]

send immo off eeprom and write car star ok
write winols my flash file and immo off eeprom to car
test and report
pass to pm

thank you very much. so you say to write this eeprom immo off and the previous flash you sent me to the ecu and it shoud start? fingers crossed

[Fabiomg89]

hello! still same result, no start, fan on full blast, no comunication to ecu, no diag no ID... what can i do next? ecu is bricked?
please help

[tothzsolt]

can you just file the file is your factory flash, try it and tell it is for your car

[Fabiomg89]

this is a sgo file. my files are all in bin

[Fabiomg89]

my ecu comes up whith 3 files when i back up with ktag. and it says to activate programing. will the micro file be bad as well?

[tothzsolt]

sgo flash file it is your factory flash for your car ecu, it should be typed with odis diagnostics or something, with ktag you can't even with kess

yes your file is bin because it reads ktag or kess ......

[Fabiomg89]

There is no other way? I have mppsv18 kess and ktag. Getting no where with any of the 3.

[tothzsolt]

honestly then i don't know what else i can help you, i have no more solution .....

[Fabiomg89]

Anyone has some kind of solution? Thanks in advance!

[Fabiomg89]

Hi people! Anyone has a full back up for my ecu from a ktag or mpps that i can use? I have a frf and sgo file but i have no tool to write it with. ��
Edc17cp14
Sw 1037529241
Sw upg 4F7910401L 0110
2.7 tdi CANC 190HP
Please please please
Wife has no car to take the kid to school, she is going to kill me soon

[Fabiomg89]

nobody can help me? please

[beretjg]

[WYCENA=Fabiomg89;3692857]to audi a6 2010 2.7 tdi canc 140kw sw: 1037529241 Aktualizacja SW: 4F7910401L 0110 Przeczytaj za pomocą ktag,
sprawdź i napraw wszystkie pliki. samochód nie chce się uruchomić, brak diagnostyki, brak identyfikatora z kess, wentylator na pełnych obrotach doceniam wielkie
dzięki[/QUOTE]


can you send me this reading full bdm

[beretjg]

?????? https://www.digital-kaos.co.uk/forums/showthread.php/778972-hi-need-to-fix-my-files-please-EDC17CP14

[beretjg]

??a6 c6 27 edc17cp14